McIntosh MCD201 Display Brightness, Reset of Microprocessors, Operation in a McIntosh System

Page 20

How to Operate the MCD201, con’t

How to Operate the MCD201, con’t

Display Brightness

The MCD201 Front Panel Information Display has three brightness settings. To change from the default setting (brightest of the three) perform the following:

1. Press and hold the STOPPush-button and rotate the TRACK Control counterclockwise, then release the control for the middle brightness setting. Refer to figure 6 on page 16.

2. With the STOPPush-button still pressed in, rotate the TRACK Control counterclockwise again for the dimmest setting.

3. In a similar manner, increase the brightness by pressing and holding in the STOPPush-button and rotating the TRACK Control clockwise, then release the control for the middle brightness setting. Repeat for the bright- est setting.

Note: The Display Brightness will return to the default setting the next time the MCD201 is switched On.

Reset of Microprocessors

In the unlikely event the controls of the MCD201 stop functioning, the microprocessors can be reset by perform- ing the following:

1. Press and hold in the STANDBY/ON Push-button for approximately five seconds. Refer to figure 6 on page 16.

2.When the STANDBY/ON LED is no longer illuminat- ed, release the STANDBY/ON Push-button.

3.When the STANDBY/ON LED is illuminated press the STANDBY/ON Push-button, the MCD201 will resume normal operation.

Note: This can be performed with the MCD201 On or in the Standby Mode.

Operation in a McIntosh System

Figure 26

 

The MCD201 basic transport functions may also be con-

 

trolled by using the Remote Control that comes with a Mc-

 

Intosh Control Center or Preamplifier. McIntosh Keypads

 

can also be used to remotely control the basic transport

 

functions of the MCD201. The labeling of Push-buttons on

 

some McIntosh Remote Controls and Keypads are differ-

 

ent from the supplied MCD201 Remote Control. Refer to

 

the listing below and figures 26 and 27:

 

MCD201 Remote Control

McIntosh Remote Control/

 

Push-button

Keypad Push-button

 

Pause

E

 

SACD/CD

Review

 

Rev

Seek Down

Figure 27

FF

Seek Up

 

Level Up

AM

 

Level Down

FM

 

20

 

 

Image 20
Contents SACD/CD Player Rain or Moisture Important Safety Instructions Customer Service Table of ContentsThank You Please Take a MomentData and IR Input Port Connectors XLR ConnectorsPower Control Connector Introduction and Performance Features Performance FeaturesSide View of the MCD201 DimensionsFront View of the MCD201 Rear View of the MCD201 Installation Rear Panel Connections Other componentsHow to Connect Control, Analog and Digital Audio How to Connect Directly to a Power Amplifier Front Panel Displays, Controls, Push-buttons and Jack STANDBY/ONFront Panel Information Display Remote Control Push-Buttons How to use the Remote Control How to Operate the MCD201 Power OnHow to Load a Disc How to Play a Sacd DiscHow to Play a CD Disc How to Pause a DiscStop Mode Track BackHow to Operate the MCD201, con’t MuteDirect Track Selection Random PlaybackMP3 Disc Playback Operation in a McIntosh System Reset of MicroprocessorsDisplay Brightness Page Specifications Audio Specifications General SpecificationsPacking Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

MCD201 specifications

The McIntosh MCD201 is a distinguished high-performance CD player that epitomizes the brand's commitment to audio excellence. Renowned among audiophiles, the MCD201 combines cutting-edge technologies with superior build quality to deliver an exceptional listening experience.

One of the standout features of the MCD201 is its advanced digital-to-analog conversion. Utilizing a high-quality 32-bit DAC, this player preserves the integrity of the music, allowing listeners to enjoy their favorite tracks with remarkable clarity and precision. The state-of-the-art DAC ensures that even the most complex recordings are reproduced with fidelity, making it an ideal choice for those who value intricate sound details.

The MCD201 is equipped with a robust disc mechanism designed for reliability, capable of playing not only CDs but also CD-R and CD-RW formats. This versatility allows users to enjoy a wide range of media, from commercially produced discs to personal recordings. In addition, the player supports high-resolution audio formats through its USB input, providing users with the option to connect external digital devices and unlock higher sound quality from their digital libraries.

Aesthetically, the MCD201 features the iconic McIntosh design, with a polished stainless steel front panel and illuminated logo, making it a stunning addition to any audio setup. The intuitive front panel includes easy-to-read LCD display and simple controls, ensuring a user-friendly experience while navigating through playlists or adjusting settings.

Another notable characteristic of the MCD201 is its extensive connectivity options. With both balanced and unbalanced audio outputs, the player can easily integrate into various audio systems, creating flexibility for audiophiles setting up their dream soundscape. The addition of a digital output allows users to connect to external DACs or processors, enhancing the overall system capabilities.

Moreover, the MCD201 is engineered with McIntosh’s meticulous attention to detail, ensuring durability and longevity. The heavy-duty construction minimizes vibrations, while the internal isolation systems diminish interference, ensuring that the sound remains pure and uncolored.

In essence, the McIntosh MCD201 CD player stands as a testament to luxury audio design, combining outstanding technical specifications and timeless style. Its advanced features, superior digital conversion capabilities, and elegant aesthetics make it a must-have for serious music lovers seeking the ultimate listening experience.