MTD A06, Wood Splitter manual Unit

Page 7

English

Operating Manual for Wood Splitter

Unit

Lubricating the splitting column Lubricate the area of the splitting column (where the splitting wedge moves to and from) with engine oil; do not use lubricating grease.

Filling the hydraulic tank

Fig. 10

1

2

Fig.10

The tank has a capacity of 13.2 l.

•Screw the vented dipstick (1) out of the inlet nozzle opening in the hydraulic tank (2).

•Fill the hydraulic tank with Dexron III automatic gear oil or 10W AW hydraulic fluid.

•Do not pour in too much oil.

•Check the level with the dipstick. The oil level must be between the “Full/Max.” and “Add/Min.” mark.

•Re-insert the vented dipstick and tighten until the upper side of the thread is flush with the upper side of the nozzle.

•Disconnect the spark-plug terminal from the engine

•Slowly pull out the pull starter on the engine, approx. 10 times, in

order to flood the hydraulic pump. Reconnect the spark-plug terminal

to the engine and start the engine as indicated in the chapter “Operating the unit”.

Caution

Please first read the whole operating manual for the unit and the engine.

•Using the operating levers, move the splitting wedge all the way backwards.

•Then let the splitting wedge move all the way forwards.

•Refill the hydraulic tank according to the level indicated on the dipstick.

Caution

If the hydraulic tank is not refilled, the warranty for the unit will no longer be valid.

•Move the splitting wedge 12x all the way forwards and backwards in order to bleed the hydraulic system.

•Top up the hydraulic tank as far the mark on the dipstick.

Caution

A part of the original hydraulic fluid was taken up by the cylinder and the hoses. Ensure that the tank is always refilled to prevent damage to the hydraulic pump.

Note: A little fluid may escape out of the ventilation screw; when the system warms up, the fluid expands.

5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Jqa=mêçÇìÅíë=âíáÉåÖÉëÉääëÅÜ~Ñí=√=p~~êÄêΩÅâÉå=√=dÉêã~åó Page Information on the rating plate Using the unit correctlyGeneral safety instructions Safe operating practicesSymbols in this manual Safety devicesAssembling the unit Attaching the high-pressure hoses Fig Attaching the connecting rod Figs a and 2bAttaching the mudguards optional Fig Attaching the splitting columnFuelling and checking/topping up the oil level Assembly work on the splitting columnPreparing the unit EngineUnit Operating levers ControlsEngine controls Starting the engine Making settings before using the unitMaking settings after starting the engine Operating the unitDamage in transit Maintenance/CleaningTransporting the unit Splitting wood with the unitServicing the unit Adjustment workRisk of damaging the unit Information about the engine WarrantyTroubleshooting Shutting down the unitTroubleshooting the hydraulics Problem Cause Solution Troubleshooting the engine Problem Cause Solution

A06, Wood Splitter specifications

The MTD A06 Wood Splitter is an innovative solution designed for both the amateur and seasoned woodworker. This powerful machine streamlines the wood-splitting process, making it easier and more efficient to handle firewood or other timber needs.

One of the standout features of the MTD A06 is its robust engine, which delivers remarkable power for splitting various wood types. Whether it's softwood or hardwood, this wood splitter can handle it all with ease. The engine’s horsepower is coupled with a hydraulic system designed for efficiency, allowing for swift and powerful splits without compromising on performance.

The MTD A06 is equipped with a durable splitting wedge that ensures optimal splitting performance. This wedge design allows users to split larger logs in a single pass, reducing the time and effort needed compared to traditional methods. The machine’s cycle time is impressively low, meaning you can split more wood in less time.

Safety is always a primary concern with machinery, and the MTD A06 addresses this through smart design elements. It features a two-handed operation, requiring both hands to control the splitter for enhanced safety during use. Additionally, the machine’s frame is built to provide stability, reducing the risk of tipping during operation.

Portability is another highlight of the MTD A06. The wood splitter features a convenient wheeled design, allowing users to transport it easily to various locations around the yard or job site. This mobility does not come at the expense of power, as the unit is still compact and easy to maneuver.

The MTD A06 also boasts user-friendly controls. The intuitive layout and clearly labeled functions mean that even beginners can quickly get to grips with the machine. Maintenance is straightforward, with easy access points for checking oil levels and other routine checks.

In summary, the MTD A06 Wood Splitter is an exceptional choice for those seeking a reliable and efficient solution for their wood-splitting needs. Its powerful engine, hydraulic capabilities, safety features, and user-friendly design make it a top contender in the market. Perfect for homeowners, landscapers, or anyone requiring firewood, the MTD A06 combines strength and convenience in one impressive package. Whether you're preparing for winter or undertaking a larger wood-processing project, this splitter delivers results with minimal fuss.
Top Page Image Contents