MTD Wood Splitter, A06 manual Controls, Operating levers, Engine controls

English Operating Manual for Wood Splitter

Controls

Fig. 11

Caution

Compare the diagram in Fig. 11 with the controls on your unit and familiarise yourself with their functions before you start work. In an emergency you must know how to switch off the unit quickly.

4	5		A
	6	12
	6
	7		B
	8
	9		A
2		13
3			B
1	10
	11
		14	15
	F ig .1 1

1Horizontal column lock

2Connecting rod

3Support block

4Cylinder

5Stripper

6Operating levers

7Splitting wedge

8Splitting column

9Wood support

10Vertical column lock

11Hydraulic tank

12Feed position = forward movement of the splitting wedge to split the wood.

Note: Both levers (A and B) must be pressed simultaneously.

13Reverse position = backward movement of the splitting wedge. Note: Both levers (A and B) must be pressed simultaneously.

14Horizontal column lock

15Vertical column lock

Operating levers

The operating levers (6 or A/B) have three positions.

Feed position: Press both operating levers to the left or down (depending on the column position) to drive the splitting wedge into the piece of wood. Note: Both operating levers must be pressed simultaneously; as soon as one lever is released, the splitting wedge stops.

Neutral position: Release one or both operating levers to stop the movement of the splitting wedge.

Reverse position: Press both operating levers to the right or up (depending on the column position) to move the splitting wedge backwards.

Note: Both operating levers must be pressed simultaneously; as soon as one lever is released, the splitting wedge stops.

Column locks

As the name suggests, these two locks are used to lock the splitting column horizontally or vertically. The vertical column lock is situated next to the oil filter, the horizontal column lock on the support of the column holder.

Engine controls

The positions and functions of the controls for the engine can be found in the enclosed engine manual.

6