SECTION 2: TO THE OWNER
Model 842 Triple Rear Bagger Kit is a grass collection system designed for use on FastAttach™ Compatible Garden Tractors equipped with a
The instructions in this manual are divided into sections. Carefully read all sections and study the illustrations to ensure proper installation and usage of this attachment. Read and observe all WARNING and CAUTION statements. They are included to provide for the protection of the equipment installer and user, and to ensure the prolonged service life of the equipment.
NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the operator’s position. Reference to the FRONT indicates the grille end; to the REAR the drawbar end.
SECTION 3: CONTENTS OF CARTON
Before beginning installation, remove all parts from the carton to make sure everything is present. Carton contents are listed below and shown in Figure 1. Hardware part number are shown in parentheses.
One Chute Tube | Three Grass Bag Assemblies |
One Discharge Chute Assembly | One Grass Catcher Cover Assembly |
One Extension Tube | One Bracket Assembly w/ Clevis Pin |
One Set of Blades | & Hairpin Clip |
|
Chute Tube | Discharge Chute | Cover Assembly |
| ||
| Assembly |
|
Extension Tube |
|
|
Bag Assemblies | Bracket Assembly |
|
|
| |
|
| Support Tube |
|
| (attached to cover assembly) |
|
| Clevis Pin |
|
| Hairpin Clip |
|
| Blades |
Figure 1
6