Starting the Engine, Stopping the Engine, Mowing

Starting the Engine

NOTE: Refer to the TRACTOR SET-UPon page 7 manual for gasoline and oil fill-up instructions.

1.Insert the tractor key into the ignition switch.

2.Disengage the PTO (Blade Engage) lever.

3.Engage the tractor’s parking brake.

4.Pull the Choke Control knob outward.

5.Turn the ignition key clockwise to the START position. After the engine starts, release the key. It will return to the ON position.

IMPORTANT: Do not hold the key in the START position for longer than ten seconds at a time. Doing so may cause damage to your engine’s electric starter.

6.After the engine starts, move the throttle control lever to the FAST position and Choke Control knob inward.

NOTE: Do not leave choke control on while operating the tractor. Doing so will result in a "rich" fuel mixture and cause the engine to run poorly.

Stopping the Engine

WARNING: If you strike a foreign object, stop the engine, disconnect the spark plug wire(s) and ground against the engine. Thoroughly inspect the machine for any damage. Repair damage before restarting.

1.If the blades are engaged, disengage the PTO.

2.Turn the ignition key counterclockwise to the OFF position.

3.Remove the key from the ignition switch to prevent unintended starting.

IMPORTANT

Do not leave the seat of the tractor without

1.disengaging PTO (Blade Engage) lever

2.depressing brake pedal

3.engaging parking brake

If leaving the tractor unattended, also turn the ignition key off and remove the key.

Do not use the shift lever to change the direction of travel when the tractor is in motion. Always use the brake pedal to bring the tractor to a complete stop before moving the shift lever.

Avoid sudden starts, excessive speed and sudden stops while driving the tractor.

Do not mow on slope in excess of 15 degrees (a rise of approximately 2-1/2 feet every 10 feet).

Keep hands and feet away from the opening of the cutting deck.

Plan your mowing pattern to avoid discharge of materials toward roads, sidewalks, bystanders and the like. Also, avoid discharging material against a wall or obstruction which may cause discharged material to ricochet back toward the operator.

Driving The Tractor

•Depress the brake pedal to release the parking brake.

•Move the throttle lever into the FAST (rabbit) position.

•To move forward, place the shift lever in the FORWARD position, then slowly depress the drive pedal until the desired speed is achieved. To move in reverse, place the shift lever in the REVERSE position, check that the area behind is clear, then slowly depress the drive pedal.

Driving On Slopes

IMPORTANT: Refer to the SLOPE GAUGE on page 6 to help determine slopes where you may operate the tractor safely.

•Mow up and down slopes, never across.

•Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

•Avoid turns when driving on a slope. If a turn must be made, attempt while going downward on the slope.

•Avoid stopping when driving up a slope. If it is necessary to stop while driving up a slope, start up smoothly and carefully to reduce the possibility of flipping the tractor over backward.

Mowing

The following information will be helpful when using the cutting deck with your tractor.

•Do not mow at high ground speed, especially if a mulch kit or grass collector is installed.

604H specifications

The MTD 604H is an advanced lawn mower designed for tackling various landscaping tasks with efficiency and precision. This powerful machine stands out in the market due to its robust set of features and cutting-edge technologies that cater to both professional landscapers and homeowners.

One of the main features of the MTD 604H is its high-performance engine. The mower is equipped with a dependable gas engine that offers superior torque and power, making it suitable for mowing large areas quickly. The engine's design emphasizes fuel efficiency, which allows users to cover more ground while minimizing fuel consumption.

Another significant characteristic of the MTD 604H is its innovative cutting deck. The mower features a wide cutting deck that can range from 36 to 42 inches, allowing for a larger clipping area. This design reduces mowing time and ensures a clean, even cut regardless of the terrain. Furthermore, the cutting height can be easily adjusted, enabling users to choose the perfect length for their grass type and seasonal conditions.

The MTD 604H also incorporates several user-friendly technologies. For instance, it has a self-propelled system that makes maneuvering easier on various terrains, such as slopes and uneven surfaces. This feature significantly reduces operator fatigue, allowing users to work longer without discomfort.

Additionally, the mower has a plush, ergonomic seat designed to provide comfort during extended use. It comes with easy-to-reach control panels that allow users to operate the mower’s functions without difficulty. The inclusion of a mulch kit further enhances its versatility, allowing users to recycle grass clippings back into the lawn instead of bagging them.

Safety is a crucial aspect of the MTD 604H. The mower is equipped with automatic blade brakes that stop the blades almost instantly when the user releases the control lever. This feature significantly reduces the risk of accidents and enhances user safety while operating the machine.

In conclusion, the MTD 604H is a feature-packed lawn mower characterized by its powerful engine, wide cutting deck, user-friendly technologies, and safety features. Whether for home use or professional landscaping services, the MTD 604H emerges as a reliable, efficient, and versatile choice for maintaining a pristine lawn.