MTD 604H manual Maintaining Your Lawn Tractor, Lubrication, Cleaning The Engine & Deck

Page 17

SECTION 6: MAINTAINING YOUR LAWN TRACTOR

WARNING: Before performing any maintenance or repairs, disengage PTO, move shift lever into neutral position, set parking brake, stop engine and remove key to prevent unintended starting.

Engine

Refer to the engine manual for engine maintenance instructions.

•Check engine oil level before each use as instructed in the engine manual. Read and follow instructions carefully. Refer to this manual for details about type and grade of oil.

Changing Engine Oil

1.Unscrew oil fill cap and remove dipstick from the oil fill tube. See Figure 12.

2.Pop open the protective cap on the end of the oil drain valve to expose the oil drain port. See Figure 12.

3.Push the oil drain hose (packed with this manual) onto the oil drain port. Route the opposite end of the hose into an appropriate oil collection container with a capacity great enough to collect the used oil (approximately 62 oz.).

4.Push the oil drain valve in slightly, then rotate counterclockwise and pull outward to begin draining oil. See Figure 12.

5.Service the oil filter as instructed in the engine manual.

6.Perform the above steps in the opposite order after oil has finished draining. Refill the engine with approximately 62 oz.(1.8 liters) of new motor oil.

Air Cleaner

Oil Fill Cap

Protective Cap

 

Oil Drain Hose

 

 

 

 

Oil Fill Tube

 

Oil Drain

 

 

 

 

 

Valve

 

 

 

Oil Drain Port

Figure 12

Service the pre-cleaner, if so equipped, and cartridge as instructed in the engine manual at the end of this manual.

Spark Plug

Clean the spark plug and reset its gap once a season, preferably at the start of each mowing season. Refer to the engine manual for correct plug type and gap specifications.

Lubrication

Engine

•Lubricate the engine with motor oil as instructed in the engine manual.

Pivot Points & Linkage

•Lubricate all pivot points on the drive system, parking brake and lift linkage at least once a season with light oil.

Rear Wheels

•Remove rear wheels from the axles once a season; lubricate the axles and rims with an all-purpose automotive grease and re-install the wheels

Front Wheels

•Each front wheel axle is equipped with a grease fitting; lubricate with a grease gun after every 25 hours of tractor operation or at least once a season.

Cleaning The Engine & Deck

•Wipe off any fuel or oil spillage on the machine promptly. Do not allow grass, leaves, and dirt to accumulate around the cooling fins or on any other part of the machine, especially the pulleys and other moving parts.

IMPORTANT: The use of a pressure washer or garden hose to clean your tractor is NOT recommended. It may cause damage to electrical components, spindles, pulleys, bearings or the engine. The use of water will reduce life of the

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesSlope Operation ServiceChildren TowingGeneral Your ResponsibilitySlope Gauge Tractor SET-UP Attaching the Battery CablesAttaching The Steering Wheel Attaching The SeatRemove Shipping Brace Gas and Oil Fill-UpKnow the Controls OperationThrottle Control Lever Ignition SwitchChoke Control Brake PedalHeadlights Systems Indicator Monitor / Hour MeterShift Lever Cruise Control ButtonSeat Adjustment Lever Safety Interlock SwitchesDeck Lift Lever Cup Holder if equippedStopping the Engine Starting the EngineDriving The Tractor MowingMulching Seat Making AdjustmentsSteering Leveling the DeckSide to Side Parking Brake AdjustmentMaintaining Your Lawn Tractor Cleaning The Engine & DeckEngine LubricationTire Pressure BatteryCharging Jump-StartingCutting Blades FuseCutting Deck Removal Nimu Changing Transmission Drive BeltLower Drive Belt Upper Drive BeltChanging the Deck Belts Model 604GModel 604H OFF-SEASON Storage Attachments & AccessoriesTrouble Possible Causes Corrective Action TroubleshootingParts List for Models 604G & 604H Models 604G & 604H Models 604G & 604H Part Description Models 604G & 604H Part 44 61 Part Description 1211 732-0614 Ring, Wire Model 604H Model 604G 17962 Switch Plate Part Description Models 604G & 604H Model 604G 46 711-1534 Pin, 3/8-16, 3/8 x 731-2363 Model 604H Model 604H MANUFACTURER’S Limited Warranty for

604H specifications

The MTD 604H is an advanced lawn mower designed for tackling various landscaping tasks with efficiency and precision. This powerful machine stands out in the market due to its robust set of features and cutting-edge technologies that cater to both professional landscapers and homeowners.

One of the main features of the MTD 604H is its high-performance engine. The mower is equipped with a dependable gas engine that offers superior torque and power, making it suitable for mowing large areas quickly. The engine's design emphasizes fuel efficiency, which allows users to cover more ground while minimizing fuel consumption.

Another significant characteristic of the MTD 604H is its innovative cutting deck. The mower features a wide cutting deck that can range from 36 to 42 inches, allowing for a larger clipping area. This design reduces mowing time and ensures a clean, even cut regardless of the terrain. Furthermore, the cutting height can be easily adjusted, enabling users to choose the perfect length for their grass type and seasonal conditions.

The MTD 604H also incorporates several user-friendly technologies. For instance, it has a self-propelled system that makes maneuvering easier on various terrains, such as slopes and uneven surfaces. This feature significantly reduces operator fatigue, allowing users to work longer without discomfort.

Additionally, the mower has a plush, ergonomic seat designed to provide comfort during extended use. It comes with easy-to-reach control panels that allow users to operate the mower’s functions without difficulty. The inclusion of a mulch kit further enhances its versatility, allowing users to recycle grass clippings back into the lawn instead of bagging them.

Safety is a crucial aspect of the MTD 604H. The mower is equipped with automatic blade brakes that stop the blades almost instantly when the user releases the control lever. This feature significantly reduces the risk of accidents and enhances user safety while operating the machine.

In conclusion, the MTD 604H is a feature-packed lawn mower characterized by its powerful engine, wide cutting deck, user-friendly technologies, and safety features. Whether for home use or professional landscaping services, the MTD 604H emerges as a reliable, efficient, and versatile choice for maintaining a pristine lawn.
Top Page Image Contents