MTD 18HP service manual Related to Fuel, When Mowing

Page 5

11.When looking for oil leaks, never run your hand over hydraulic hoses, lines or fittings. Never tighten or adjust hydraulic hoses, lines or fittings while the system is under pressure. If high-pressure oil penetrates the skin, the oil must be removed within a few hours by a doc- tor familiar with this form of injury or serious complications may result.

B.Related to Fuel

1.Fuel is highly flammable. Please respect it.

2.Do not smoke or permit others to smoke while handling fuel.

3.Always use approved containers for fuel.

4.Always shut off the engine and permit it to cool before removing the fuel tank cap.

5.Always fill the fuel tank outdoors.

6.If the fuel container spout will not fit inside the fuel tank opening, use a funnel.

7.When filling the fuel tank, stop when the fuel reaches one inch from the top. This space is necessary for tank expansion. Do not overfill.

8.Wipe up any spilled fuel.

C.When Mowing

1.Keep adults, children and pets away from the area to be mowed.

2.When operating this mower in the forward direction, DO NOT allow the steering levers to return to the neutral position on their own. Always maintain a firm grip on the levers, operate them smoothly and avoid any sudden movements of the levers when starting or stopping.

3.If the mower is equipped for side discharge, never use the mower without the discharge chute installed and placed in the down position.

4.Always remove debris and other objects from the area to be mowed.(Note: debris and loose grass will reduce traction.)

5.Mow only in daylight.

6.Watch for holes, sprinkler heads and other hidden hazards.

7.Avoid driving too close to trees, creeks, ditches, sand traps and other obstacles.

8.Before backing up, check behind you and watch where you’re going.

9.Always reduce speed when making a turn, and when grass is wet.

10.Always mow across slopes, never up and down the slope. Do not operate on steep slopes and slow down before turning.

11.Be careful when crossing gravel paths or roadways. Always turn off the blade clutch switch and wait until the blades stop rotating and raise the cutting deck to the transport

position. Always allow other vehicles to have the right-of-way.

12.If you hit a solid object while mowing, turn off the blade clutch switch, place the left and right steering levers in the neutral, opened-out position, move the throttle to slow, set the parking brake, shut off the engine and take the key from the ignition switch. Inspect for damage. Repair any damage. Make sure the blades are in good condition and that the blade bolts are tight before restarting the engine.

13.Never leave the mower unattended without: turning off the blade clutch switch; placing the left and right steering levers in the neutral opened-out position; moving the throttle to slow; setting the parking brake; shutting off the engine and taking the key from the ignition switch.

14.Never walk or stand on the discharge side of a mower with the engine running. Turn off the blade clutch switch if another person approaches while you are operating the mower.

15.Never attempt to operate the traction unit without the mowing deck attached.

16.Keep the mower and especially the engine and hydraulic components clean and free of grease, grass and leaves to reduce the chance of fire and to permit proper cooling.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents MMZ Jr Hydrostatic Zero-Turn Riding Mower Table of Contents Forward General General Safety OperationsSafety Precautions Related to Fuel When MowingShield Missing do not Operate Safety Decals and LabelsSpecifications Operating Instructions When MowingSafety Awareness when Mowing To Mow Grass and Produce a Striped Pat- tern Figure Fuel Shutoff Valve Check the fluid levels and tires Initial AdjustmentsLubricate all fittings listed in the mainte- nance section Zero Turn Break-In And Operating ProceduresOrientation Initial OperationStart the Engine Mower Deck Maintenance ServiceParking the Mower Removing the Mower DeckChanging the Blade Drive Belts Changing a BladeStop the engine and remove the key from the ignition switch Changing the Spindle AssemblyHydraulic Oil Adding Hydraulic Oil use SAE20WInstalling the Battery Battery RemovalElectrical Circuit Specific Gravity Freezing Temp FPage Inflation Pressure TiresBrakes Hydraulic Oil Tank and Filter Hydraulic SystemStorage Maintenance Schedule If Mower is so equipped OIL ChartEnginge RPM Check and Adjustment High Speed Tracking AdjustmentDeck Center Anti-Scalp Roller Settings Deck Corner Ball Wheel Roller SettingsLap Bar Adjustment Deck leveling ProcedureHeight of Cut LInk Point a Jam Nuts Point C Wiring Diagram Equipment TWO-YEAR Limited Warranty

18HP specifications

The MTD 18HP is a robust and reliable lawn tractor that has gained popularity amongst gardening enthusiasts and homeowners alike. This machine is designed to provide efficient performance while maintaining a user-friendly experience. One of the standout features of the MTD 18HP is its powerful 18 horsepower engine, which ensures that users can tackle even the toughest mowing tasks with ease. The engine is engineered to deliver impressive torque, making it suitable for a variety of environments and terrain types.

One of the key technologies integrated into the MTD 18HP is its hydrostatic transmission system. This feature allows for smooth and seamless operation, enabling the operator to effortlessly control the speed and direction of the mower without the need for shifting gears. This element greatly enhances the overall user experience and makes the machine easier to handle, especially for those who may be new to operating tractors.

The cutting deck of the MTD 18HP is another remarkable attribute. Typically featuring a 42-inch or 46-inch cutting width, the deck is designed for efficient grass cutting and allows for quick maneuverability around obstacles. With multiple cutting height adjustments, users can customize their mowing height to suit their lawn's specific needs. The durable construction of the cutting deck also aids in extending the lifespan of the mower while ensuring that it can withstand challenging mowing conditions.

Additionally, the MTD 18HP is equipped with ergonomic controls that enhance comfort during operation. The contoured seat and easy-to-reach controls promote a more enjoyable mowing experience, reducing fatigue during extended usage. The tractor also features large rear wheels that provide excellent traction and stability on uneven terrain.

Safety is a priority with the MTD 18HP, which includes features such as an automatic blade brake that engages when the operator leaves the seat, preventing any accidental injury.

In summary, the MTD 18HP is a powerful, user-friendly lawn tractor that combines impressive engine performance with innovative technologies and thoughtful design features. From its hydrostatic transmission to its adjustable cutting deck and ergonomic controls, this tractor is well-equipped to handle a range of yard maintenance tasks with ease and efficiency. Whether for residential or light commercial use, the MTD 18HP remains a solid choice for those who seek reliability and performance in their lawn care equipment.
Top Page Image Contents