Attaching Starter Rope, Assembling Grass Catcher

•Fasten the cable to the lower handle with the two cable ties found on the lower handle. Pull the cable ties tight and trim off the excess. See Figure 4.

Cable Tie

Lower

Handle

Figure 4

NOTE: Your mower is shipped with the handle in the higher position. If you wish to lower the height of the handle, refer to the Adjustment Section at this time.

Attaching Rear Wheels (If Not Already Attached)

•Remove the hex flanged nut on the rear axle from each side and place the rear wheel on the axle. See Figure 5. Reinsert the flanged nut into the axle as shown, and tighten securely. Repeat on other side.

Rear Wheel

Rear Axle

Hex

Nut

Figure 5

Attaching Starter Rope

The rope guide is already attached to the right side of the upper handle of your mower. See Figure 6.

	Wing Nut
	Upper Handle
Starter Rope
Rope Guide	Lower Handle

Figure 6

•With the spark plug wire disconnected and grounded, hold the blade control handle against the upper handle, and pull the rope out of the engine.

•Slip the rope through the rope guide as shown below. Tighten the wing nut holding the rope guide to the upper handle.

Assembling Grass Catcher

NOTE: If the grass catcher came pre-assembled, proceed to the next section. If it came unassembled, follow the steps below to assemble it first, before attaching to the mower.

•Insert frame into grass bag with the black plastic side on the bottom of bag. See Figure 7.

•Slip the openings in the side of the plastic channel on bag over the hooks on the grass catcher frame. Secure bag to the frame by working the six plastic channels on bag over frame. All of the plastic chan- nels except the center top of the bag attach from the outside of bag. The center top of the bag attaches from inside the bag. See Figure 7.

	Grass Catcher	Insert frame
	Frame
		into bag

	Grass Bag
	Plastic	Grass Catcher
		Assembly
	Channel
		Complete

Figure 7

Attaching Grass Catcher & Chute

WARNING: Never operate the mower unless the hooks on the grass catcher are firmly seated on the chute pivot rod, and the rear discharge door rests firmly against the top of the grass catcher.

IMPORTANT: Make sure cable is routed to the outside of the handle so that it is not in the way when attaching the grass catcher.

549 specifications

The MTD 549 is a versatile and high-performance machine that stands out in its category for its robust features and advanced technologies. Designed primarily for professional landscapers and homeowners, the MTD 549 is ideal for tackling a variety of outdoor tasks, such as mowing, mulching, and yard cleanup.

One of the main features of the MTD 549 is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it delivers exceptional cutting performance and efficiency. The engine is designed to provide ample torque, ensuring that the mower can handle thick grass and tough terrains without compromising on performance. This makes the MTD 549 suitable for both small and large lawns, adapting seamlessly to different conditions.

The cutting deck of the MTD 549 is another notable characteristic. With a generous 21-inch cutting width, it allows for efficient mowing in fewer passes, saving time and effort. The adjustable cutting height feature offers flexibility, enabling users to choose from multiple height settings to achieve their desired grass length. This adaptability is especially important for maintaining a healthy lawn, as different grasses require different cutting heights.

Additionally, the MTD 549 incorporates innovative technologies to enhance user experience and safety. The mower features a simple pull-start mechanism that ensures quick and easy engine ignition. For added safety, the machine is equipped with a safety key that prevents accidental starts, protecting users and their surroundings.

Comfort and ease of use are also prioritized in the design of the MTD 549. The ergonomic handle is adjustable, allowing users of varying heights to find a comfortable grip. This is crucial for reducing fatigue during longer mowing sessions. The mower's lightweight construction further enhances maneuverability, making it easy to navigate tight corners and uneven landscapes.

Maintenance is made simpler with the MTD 549, thanks to its easy-access air filter and spark plug, which allows for quick inspections and replacements. The durable construction materials used in the mower enhance its longevity, ensuring that it remains a reliable tool for years to come.

In conclusion, the MTD 549 is a powerful, efficient, and user-friendly mower equipped with advanced features and technologies. Its strong engine, adjustable cutting deck, emphasis on safety, and ergonomic design make it an excellent choice for anyone looking to maintain a pristine lawn with minimal effort. Whether for home use or professional landscaping, the MTD 549 is a robust solution for diverse mowing needs.