Installing Front Wheels

•With the spark plug wire disconnected and grounded, hold the blade control handle against the upper handle, and pull the starter rope out of the engine. Release the blade control handle. Slip the starter rope into the rope guide. Tighten the wing nut.

•Securely place the front of mower on raised blocks.

•Insert shoulder screw through front wheel. Place cupped washer on the shoulder screw (crowned side against the wheel). Insert shoulder screw into the pivot arm. See Figure 5.

•Assemble the other side in the same manner.

Shoulder

Screw

Cupped

Washer

Figure 5

Installing Rear Wheels

•Securely place the rear of mower on raised blocks.

•Place spring washer (cupped side toward handle bracket assembly) on the axle that extends from the pivot arm assembly. See Figure 6.

•Slide wheel onto axle and secure with lock nut.

•Assemble the other side in the same manner.

Spring

Washer

Lock

Nut

Figure 6

NOTE: This manual represents two different model series. Model 500 series comes with the side discharge assembly on the unit and a snap on mulching baffle. The 510 series comes with the mulching baffle on the unit and a snap on side discharge chute.

Removing Chute Retainer

The chute deflector on your mower is held in an upright position by a retainer for shipping purposes only. Remove the retainer, following steps below, before running the mower for the first time.

•Push the chute deflector up and towards the engine. Holding the deflector in this position, remove the retainer. See Figure 7.

•Lower the chute deflector carefully to its operating position keeping your fingers out if the way.

Raise Chute

Deflector

Remove

Retainer

Figure 7

WARNING: The chute retainer must be removed and discarded before operating the mower.

Installing Mulching Baffle

If your mower is equipped with the optional mulching baffle, install it following these instructions:

•Lift up side discharge chute and insert the mulching baffle so that the notches at the bottom of the baffle sit firmly on the lip of the deck opening. See Figure 8.

•Snap the hooks of the baffle over the hinge pin on the discharge chute. Make sure that the hooks snaps into place, locking the mulching baffle firmly onto the mower.

•Release the side discharge chute.

Discharge

Chute

	Baffle
	Hook Insert Notches	Hinge
	On Top Of Lip	Hinge
	On Top Of Lip	Pin
		Pin

Figure 8

500 Thru 519 specifications

The MTD 500 Thru 519 series represents a significant evolution in technological advancements and practical features for outdoor power equipment, primarily focused on enhancing user experience and safety. This versatile range of products is designed for efficiency, ranging from mowers to trimmers, catering to both commercial and residential users.

One of the standout features of the MTD 500 Thru 519 series is its robust engine performance. Powered by reliable and efficient four-stroke engines, these machines deliver consistent power, ensuring optimal performance in various conditions. This range is equipped with advanced engine technology that reduces emissions, making them environmentally friendly while also ensuring compliance with regulatory standards.

Another notable characteristic is the ergonomic design integrated into these models. MTD places a strong emphasis on user comfort, with adjustable handles and lightweight construction that reduce physical strain during operation. Furthermore, the incorporation of anti-vibration technology minimizes user fatigue, allowing for longer periods of use without discomfort.

The cutting systems within the MTD 500 Thru 519 series also deserve recognition. With precision-engineered blades and adjustable cutting heights, users can achieve a perfect cut tailored to their specific lawn conditions. The ease of maintenance is enhanced through easily accessible components, ensuring that users can keep their equipment in top shape without unnecessary hassle.

Technologically, MTD has incorporated intuitive control systems. This includes features such as electric start options and self-propelled capabilities, allowing users to tackle various terrains effortlessly. Additionally, some models come equipped with intuitive dashboard displays that provide real-time feedback on performance metrics, enhancing user control and awareness.

Safety features are another cornerstone of the MTD 500 Thru 519 series. The machines come with safety guards and automatic shut-off systems that react to potential hazards. This innovative approach not only protects the user but also extends the longevity of the equipment.

In conclusion, the MTD 500 Thru 519 series showcases a blend of efficiency, comfort, and safety, making it an ideal choice for those seeking high-quality outdoor power equipment. With their powerful engines, ergonomic designs, cutting-edge technology, and commitment to safety, these models are well-equipped to meet the demands of any lawn care task, ensuring that users achieve excellent results with every use.