MTD 500 Thru 519 manual Know Your Lawn Mower, Stopping Engine

Page 9

Mulching

Baffle

Side Discharge

Hooks

Chute

 

Figure 9

Installing Side Discharge Chute

If your mower is equipped with the optional side discharge chute, install it following these instructions:

Slide the hooks of the side discharge chute over the hinge pin on the mulching baffle. Make sure that the hooks snaps into place, locking the chute firmly onto the mower. See Figure 9.

Release the mulching baffle.

SECTION 4: KNOW YOUR LAWN MOWER

Read this operator’s manual and safety rules before operating your lawn mower. Compare the illustration in Figure 10 with your lawn mower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference.

WARNING: The operation of any lawn mower can result in foreign objects being thrown into the operator’s eyes and causing severe eye damage. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.

Recoil Starter

Blade Control

Handle

Mulching

Plug

Discharge

Chute

Recoil

StarterCutting Height

Adjustment

Lever

The recoil starter is attached to the right lower handle. Stand behind the unit and pull the recoil starter to start the unit. See Figure 10.

Blade Control Handle

The blade control handle is located on the upper handle of the mower. The blade control handle must be depressed in order to operate the unit. Release blade control handle to stop engine and blade.

WARNING: This blade control mechanism is a safety device. Never attempt to bypass its operations.

Cutting Height Adjustment Lever

These levers are located on each wheel and they are used to adjust the cutting height. All four levers have to be at the same relative position to ensure an uniform cut.

Engine Controls

See the separate engine manual for the location and function of the controls on the engine.

Mulching

Plug

Discharge

Chute

Figure 10

Stopping Engine

Release blade control handle to stop the engine and the blade.

Disconnect spark plug wire and ground it to a bolt on the engine.

WARNING: Before using your lawn mower, again refer to the Safety Section in this manual. Always be careful.

9

Image 9
Contents OPERATOR’S Manual Table of Contents General Operation Maintaining SafetySlope Operation Page Slope Gauge Setting Up Your Lawn Mower Disconnecting Spark Plug WireAssembling Your Lawn Mower Removing Unit From CartonInstalling Front Wheels Stopping Engine Know Your Lawn MowerOperating Your Lawn Mower Making AdjustmentsHandle Height Adjustment Customer ResponsibilitiesGeneral Recommendations Lubrication MaintenanceProblem Cause Remedy TroubleshootingModels 500 thru Part Description MANUFACTURER’S Limited Warranty

500 Thru 519 specifications

The MTD 500 Thru 519 series represents a significant evolution in technological advancements and practical features for outdoor power equipment, primarily focused on enhancing user experience and safety. This versatile range of products is designed for efficiency, ranging from mowers to trimmers, catering to both commercial and residential users.

One of the standout features of the MTD 500 Thru 519 series is its robust engine performance. Powered by reliable and efficient four-stroke engines, these machines deliver consistent power, ensuring optimal performance in various conditions. This range is equipped with advanced engine technology that reduces emissions, making them environmentally friendly while also ensuring compliance with regulatory standards.

Another notable characteristic is the ergonomic design integrated into these models. MTD places a strong emphasis on user comfort, with adjustable handles and lightweight construction that reduce physical strain during operation. Furthermore, the incorporation of anti-vibration technology minimizes user fatigue, allowing for longer periods of use without discomfort.

The cutting systems within the MTD 500 Thru 519 series also deserve recognition. With precision-engineered blades and adjustable cutting heights, users can achieve a perfect cut tailored to their specific lawn conditions. The ease of maintenance is enhanced through easily accessible components, ensuring that users can keep their equipment in top shape without unnecessary hassle.

Technologically, MTD has incorporated intuitive control systems. This includes features such as electric start options and self-propelled capabilities, allowing users to tackle various terrains effortlessly. Additionally, some models come equipped with intuitive dashboard displays that provide real-time feedback on performance metrics, enhancing user control and awareness.

Safety features are another cornerstone of the MTD 500 Thru 519 series. The machines come with safety guards and automatic shut-off systems that react to potential hazards. This innovative approach not only protects the user but also extends the longevity of the equipment.

In conclusion, the MTD 500 Thru 519 series showcases a blend of efficiency, comfort, and safety, making it an ideal choice for those seeking high-quality outdoor power equipment. With their powerful engines, ergonomic designs, cutting-edge technology, and commitment to safety, these models are well-equipped to meet the demands of any lawn care task, ensuring that users achieve excellent results with every use.