MTD 690 through 699 manual Children, Service, Do Not

Page 4

All slopes require extra caution. If you cannot back up the slope or if you feel uneasy on it, do not mow it.

For your safety, use the slope gauge included as part of this manual to measure slopes before operating this unit on a sloped or hilly area. If the slope is greater than 15° as shown on the slope gauge, do not operate this unit on that area or serious injury could result.

Do:

Mow up and down slopes, not across.

Remove obstacles such as rocks, limbs, etc.

Watch for holes, ruts or bumps. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

Use slow speed. Choose a low enough gear so that you will not have to stop or shift while on the slope. Always keep machine in gear when going down slopes to take advantage of engine braking action.

Follow the manufacturer’s recommendations for wheel weights or counterweights to improve stability.

Use extra care with grass catchers or other attachments. These can change the stability of the machine.

Keep all movement on the slopes slow and gradual. Do not make sudden changes in speed or direction. Rapid engagement or braking could cause the front of the machine to lift and rapidly flip over backwards which could cause serious injury.

Avoid starting or stopping on a slope. If tires lose

traction, disengage the blade(s) and proceed slowly straight down the slope.

Do Not:

Do not turn on slopes unless necessary; then, turn slowly and gradually downhill, if possible.

Do not mow near drop-offs, ditches or embankments. The mower could suddenly turn over if a wheel is over the edge of a cliff or ditch, or if an edge caves in.

Do not mow on wet grass. Reduced traction could cause sliding.

Do not try to stabilize the machine by putting your foot on the ground.

Do not use grass catcher on steep slopes.

Children

Tragic accidents can occur if the operator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity. Never assume that children will remain where you last saw them.

Keep children out of the mowing area and in watchful care of an adult other than the operator.

Be alert and turn machine off if children enter the area.

Before and when backing, look behind and down for small children.

Never carry children, even with the blades off. They may fall off and be seriously injured or interfere with the safe machine operation.

Never allow children under 14 years old to operate the machine. Children 14 years and over should only operate machine under close parental supervision and proper instruction.

Use extra care when approaching blind corners, shrubs, trees or other objects that may obscure your vision of a child or other hazard.

Remove key when machine is unattended to prevent unauthorized operation.

Service

Use extreme care in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive.

Use only an approved container.

Never remove fuel cap or add fuel with the engine running. Allow engine to cool at least two minutes before refueling.

Replace fuel cap securely and wipe off any spilled fuel before starting the engine as it may cause a fire or explosion.

Extinguish all cigarettes, cigars, pipes and other sources of ignition.

Never refuel the machine indoors because fuel vapors will accumulate in the area.

Never store the fuel container or machine inside where there is an open flame or spark, such as a gas hot water heater, space heater or furnace.

Never run a machine inside a closed area.

To reduce fire hazard, keep the machine free of grass, leaves or other debris build-up. Clean up oil or fuel spillage. Allow machine to cool at least 5 minutes before storing.

Before cleaning, repairing or inspecting, make certain the blade and all moving parts have stopped. Disconnect the spark plug wire, and keep the wire away from the spark plug to prevent accidental starting.

Check the blade and engine mounting bolts at frequent intervals for proper tightness. Also, visually inspect blade for damage (e.g., excessive wear, bent, cracked). Replace with blade which meets original equipment specifications.

Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.

Never tamper with safety devices. Check their proper operation regularly. Use all guards as instructed in this manual.

After striking a foreign object, stop the engine, remove the wire from the spark plug and thoroughly inspect the mower for any damage. Repair the damage before restarting and operating the mower.

Grass catcher components are subject to wear, damage and deterioration, which could expose

4

Image 4
Contents Operator’s Manual Table of Contents General Operation Important Safe Operation PracticesSlope Operation Children ServiceDo Not Your Responsibility Slope Guage Handling Battery Identifying Battery TypeAssembling Your Lawn Tractor UnpackingActivating & Charging Battery Manual Adjustment SeatAttaching Steering Wheel Attaching SeatQuick Adjustment Seat Installing Mulching PlugAttaching Chute Deflector Installing Battery Type a BatteryType B Battery Tire PressureKnow Your Lawn Tractor Optional Features Operating Your Lawn Tractor Gas And Oil Fill-UpStarting Engine Stopping EngineSetting Cutting Height Manual Adjustment SeatQuick Adjustment Seat Grass CollectorBrake Adjustment Wheel AdjustmentDeck Leveling Cutting Deck EngagementBattery Care Cleaning BatteryMaintaining Your Lawn Tractor CarburetorLubrication Cutting BladesBelt Replacement Blade Mounting TorqueDeck Belt 38 and 42 Decks Deck Belts 46 DeckCleaning Engine & Deck Hydrostatic Transmission CoolingFuel Filter Drive BeltOil Drain Sleeve If equipped EngineOil Drain Valve If equipped Optional Equipment Description Model NoTrouble Shooting Guide Trouble Possible Causes Corrective ActionYour Notes MANUFACTURER’S Limited Warranty

690 through 699 specifications

MTD (Motor Technology Division) has developed a remarkable series of compact tractors under the model numbers 690 through 699, which have gained popularity among agricultural professionals and hobby farmers alike. These models are designed to provide powerful, efficient, and versatile performance for a variety of farming tasks.

One of the standout features of the MTD 690 to 699 series is their ergonomic design, which emphasizes operator comfort and ease of use. The tractors are equipped with adjustable seats, intuitive controls, and clear visibility from the operator’s station, ensuring that users can work for extended periods without fatigue. This focus on comfort makes these tractors suitable for both full-time farmers and those who engage in part-time farming or landscaping.

In terms of technology, this series is fitted with advanced engine options that deliver impressive horsepower. The engines are designed for optimal fuel efficiency, reducing operational costs and environmental impact. Additionally, features like electronic fuel injection enhance performance, ensuring reliable startup and smooth operation under varying load conditions.

The transmission systems found in the MTD 690 to 699 models are engineered for versatility. Many models are equipped with hydrostatic transmissions, allowing for seamless speed and directional changes without the need for clutch engagement. This capability is particularly useful when maneuvering in tight spaces or performing tasks that require precision.

Another defining characteristic of this series is their hydraulic systems, which provide powerful lifting capabilities. This makes it easier to attach and operate a wide range of implements and attachments, from loaders to mowers, enhancing productivity on the farm. The hydraulic systems are designed with user-friendliness in mind, allowing for quick attachment changes that reduce downtime during chores.

Durability is also a hallmark of MTD's 690 through 699 tractors. Constructed with robust materials and designed to withstand harsh working conditions, they feature reinforced frames and components that provide longevity and reliability. This durability ensures that the tractors can handle demanding tasks day in and day out, making them a dependable asset for any agricultural operation.

In summary, the MTD 690 through 699 series offers a blend of comfort, efficiency, and technology, making them an attractive option for anyone looking to enhance their farming capabilities. With powerful engines, user-friendly controls, advanced hydraulic systems, and exceptional durability, these compact tractors are poised to meet the needs of today’s diverse agricultural landscape.