MTD Series 410 warranty Maintenance

Page 10

5

Maintenance

WARNING

Always stop engine, disconnect spark plug, and ground against engine before cleaning, lubricating or doing any kind of maintenance on your machine.

We do not recommend the use of pressure washers or garden hose to clean your unit. These may cause damage to electrical components, spindles, pulleys, bearings, or the engine. The use of water will result in shortened life and reduce serviceability.

����������������

��������������

�����������

Figure 10

General Recommendations

1.Always observe safety rules when performing any maintenance.

2.The warranty on this lawn mower does not cover items that have been subjected to operator abuse or negligence. To receive full value from warranty, operator must maintain the lawn mower as instructed here.

3.Changing of engine-governed speed will void engine warranty.

4.All adjustments should be checked at least once each season.

5.Periodically check all fasteners and make sure these are tight.

Lubrication

1.Lubricate the pivot points on the blade control handle at least once a season with light oil. The blade control must operate freely in both directions. See Figure 10.

2.If your mower is equipped with ball bearing wheels, lubricate at least once a season with a light oil, all other types require no lubrication. However, if the wheels are removed for any reason, lubricate the surface of the axle bolt and the inner surface of the wheel with light automotive oil.

3.Lubricate the torsion spring and pivot point on the rear door periodically with light oil to prevent rust. See Figure 10.

4.Follow the accompanying engine manual for lubrica- tion schedule and instruction.

Engine

1.Refer to the separate engine manual for engine maintenance instructions.

2.Maintain engine oil as instructed in the separate engine manual packed with your unit. Read and follow instructions carefully.

3.Under normal conditions service air cleaner as instructed in the separate engine manual packed with your unit. Clean every few hours under extremely dusty conditions. Poor engine performance and flooding usually indicates that the air cleaner should be serviced.

4.The spark plug should be cleaned and the gap reset once a season. Spark plug replacement is recom- mended at the start of each mowing season; check engine manual for correct plug type and gap specifica- tions.

NOTE: This spark ignition system meets all require- ments of the Canadian Interference-Causing Equipment Regulations.

5.Clean the engine regularly with a cloth or brush. Keep the cooling system (blower housing area) clean to permit proper air circulation which is essential to engine performance and life. Be certain to remove all grass, dirt and combustible debris from muffler area.

Deck

The underside of the mower deck should be cleaned after each use to prevent a buildup of grass clippings, leaves, dirt or other matter. If this debris is allowed to accumulate, it will invite rust and corrosion, and may prevent proper mulching.

The deck may be cleaned by tilting the mower and scrap- ing clean with a suitable tool (make certain the spark plug wire is disconnected).

Blade Care

WARNING: When removing the cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade.

Periodically inspect the blade adapter for cracks, especial- ly if you strike a foreign object. Replace when necessary. Follow the steps below for blade service:

1.Disconnect spark plug wire from spark plug.

2.Tip mower as specified in separate engine manual. If it does not specify turn mower on its side making sure that the air filter and the carburetor are up.

3.Remove the bolt and the blade bell support which hold the blade and the blade adapter to the engine crankshaft. See Figure 11.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Rotary Mower Model Series 10/21/2005Finding and Recording Model Number Table of ContentsCustomer Support Slope Gauge General Operation Your ResponsibilitySlope Operation General Service ServiceChildren Setup Adjustments Your unitTop of the grass Pivot rod,Catcher Operating Your Lawn Mower Know Your Lawn MowerTo Stop Engine Using Your Lawn MowerUsing Grass Catcher Operating TipsMaintenance Off-Season Storage Rear Flap ReplacementBlade Mounting Torque Trouble Shooting Problem Cause RemedyMANUFACTURER’S Limited Warranty for Page Parts List Pièces Détachées Pas couvre ne limitée garantie Cette Client du disposition la à exclusif recours leMTD de Com.mtdcanadaSolution Cause Problème Dépannage’utilisateur Arrière déflecteur du RemplacementEntretien Lame la de montage de CoupleCoupe Lame la de remplacement et EntretienMoteur EfficaceVider Utilisation’utilisation Conseil Commandes Faites NeRéglages et montage de Instructions Remarque Responsabilité Votre EnfantReproduction la à liés problèmes d’autres Pente une sur UtilisationCette Inclinomètre Matières des Table Vente-après ServiceModèle de numéro le trouver Pour ’utilisation La voir détachées Pièces10/21/2005 410 Séries Rotative Tondeuse po772C0795

Series 410 specifications

The MTD Series 410 is a remarkable advancement in modern outdoor power equipment, designed for both professional users and avid gardening enthusiasts. This series is known for its durable construction, powerful performance, and user-friendly features, making it an excellent choice for a variety of lawn care applications.

One of the standout features of the MTD Series 410 is its robust engine. Equipped with an advanced four-stroke engine, it delivers reliable power and efficient fuel consumption, ensuring that users can tackle even the toughest mowing tasks with ease. This engine is designed for longevity, with high-quality components that withstand the rigors of extended use. The mowing deck is crafted from heavy-duty materials, providing exceptional cutting performance and stability, while also minimizing wear and tear.

Another key characteristic of the MTD Series 410 is its innovative cutting technology. The series offers a range of cutting widths, allowing users to choose the model that best suits their needs. The adjustable cutting height feature ensures that users can achieve the perfect lawn finish, whether they prefer a short trim or a longer grass setting. The series also incorporates a mulching system that finely chops clippings to nourish the soil, promoting a healthier lawn ecosystem.

Ease of use is a priority in the MTD Series 410 design. The ergonomic handles provide a comfortable grip, reducing fatigue during prolonged operation. Many models in the series are equipped with self-propelled functionality, making it effortless to maneuver across various terrains without excessive effort. Additionally, the intuitive control panel simplifies the operation, allowing users to make adjustments on-the-fly without diverting their attention from the task at hand.

For maintenance convenience, the MTD Series 410 shines with its easy-access components. Features like tool-free deck removal and accessible air filters simplify service, allowing users to perform routine maintenance with minimal hassle. This focus on user experience ensures that the equipment remains in peak condition over time, enhancing overall longevity and reliability.

In summary, the MTD Series 410 combines powerful performance, advanced cutting technology, and user-oriented design, making it a top choice in the realm of lawn care equipment. Whether users are maintaining a small garden or managing larger landscapes, this series provides a dependable solution that enhances productivity while ensuring an impeccable lawn. With its standout features and commitment to quality, the MTD Series 410 is truly a standout in modern outdoor power tools.
Top Page Image Contents