MTD Series 410 warranty Rear Flap Replacement, Off-Season Storage, Blade Mounting Torque

Page 11

Figure 11

4.Remove blade and adapter from the crankshaft.

5.The blade may be resharpened by removing it and either grinding or filing the cutting edge keeping as close to the original bevel as possible. Do not attempt to sharpen the blade while it is still on the mower.

6.It is extremely important that each cutting edge receives an equal amount of grinding to prevent an unbalanced blade.

NOTE: Improper blade balance will result in excessive vibration causing eventual damage to the engine and mower. Be sure to carefully balance blade after sharpen- ing. Possible damage resulting from blade unbalance condition is not the responsibility of the manufacturer.

NOTE: Always remove blade from the adapter for testing balance.

7.The blade can be tested for balance by balancing it on a round shaft screwdriver. Remove metal from the heavy side until it balances evenly.

8.Before reassembling the blade and the blade adapter to the unit, lubricate the engine crankshaft and the inner surface of the blade adapter with light oil.

9.Install the blade adapter on the crankshaft with the “star” away from the engine. See Figure 11. Place the blade with the side marked “bottom” (or with part number) facing away from the adapter. Align the blade bell support over the blade with the tabs in the holes of the blade and insert the hex bolt.

10.Tighten the hex bolt to the torque listed below:

Blade Mounting Torque

Center Bolt 450 in. lb. min., 600 in.lb. max.

To insure safe operation of your unit, ALL nuts and bolts must be checked periodically for correct tightness.

Rear Flap Replacement

1.The rear flap is attached to the back of the mower deck, and is designed to minimize the possibility that objects will be thrown from the rear of the mower toward the operator. If the rear flap becomes dam- aged, replace as follows.

2.To remove the old rear flap, cut off the flat end of the wire rod which secures it to the deck using a pair of side-cutters. Attach the new rear flap using the new rod provided with the rear flap, bending the ends of the rod over to secure.

Off-Season Storage

The following steps should be taken to prepare your lawn mower for storage.

1.Clean and lubricate mower thoroughly as described in the lubrication instructions.

2.We do not recommend the use of a pressure washer or garden hose to clean your unit.

3.Refer to engine manual for correct engine storage instructions.

4.Coat mower’s cutting blade with chassis grease to prevent rusting.

5.Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertilizer.

NOTE: When storing any type of power equipment in a poorly ventilated or metal storage shed, care should be taken to rust-proof the equipment. Using a light oil or silicone, coat the equipment, especially cables and all moving parts of your lawn mower before storage.

5

Maintenance

WARNING

When removing the cutting blade for sharpening or replacement, protect your hands with a pair of heavy gloves or use a heavy rag to hold the blade.

An unbalanced blade will cause excessive vibration when rotat- ing at high speeds. It may cause damage to mower, and could break causing per- sonal injury.

Cutting grass in sandy soil condition causes abrasive wear to the blade.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents 10/21/2005 Rotary Mower Model SeriesCustomer Support Table of ContentsFinding and Recording Model Number Slope Gauge Slope Operation Your ResponsibilityGeneral Operation Children ServiceGeneral Service Your unit Setup AdjustmentsCatcher Pivot rod,Top of the grass Know Your Lawn Mower Operating Your Lawn MowerOperating Tips Using Your Lawn MowerUsing Grass Catcher To Stop EngineMaintenance Blade Mounting Torque Rear Flap ReplacementOff-Season Storage Problem Cause Remedy Trouble ShootingMANUFACTURER’S Limited Warranty for Page Parts List Pièces Détachées Com.mtdcanada Client du disposition la à exclusif recours leMTD de Pas couvre ne limitée garantie CetteDépannage Solution Cause ProblèmeLame la de montage de Couple Arrière déflecteur du RemplacementEntretien ’utilisateurEfficace Lame la de remplacement et EntretienMoteur Coupe’utilisation Conseil UtilisationVider Faites Ne CommandesRéglages et montage de Instructions Remarque Enfant Responsabilité VotreCette Pente une sur UtilisationReproduction la à liés problèmes d’autres Inclinomètre ’utilisation La voir détachées Pièces Vente-après ServiceModèle de numéro le trouver Pour Matières des Table772C0795 410 Séries Rotative Tondeuse po10/21/2005

Series 410 specifications

The MTD Series 410 is a remarkable advancement in modern outdoor power equipment, designed for both professional users and avid gardening enthusiasts. This series is known for its durable construction, powerful performance, and user-friendly features, making it an excellent choice for a variety of lawn care applications.

One of the standout features of the MTD Series 410 is its robust engine. Equipped with an advanced four-stroke engine, it delivers reliable power and efficient fuel consumption, ensuring that users can tackle even the toughest mowing tasks with ease. This engine is designed for longevity, with high-quality components that withstand the rigors of extended use. The mowing deck is crafted from heavy-duty materials, providing exceptional cutting performance and stability, while also minimizing wear and tear.

Another key characteristic of the MTD Series 410 is its innovative cutting technology. The series offers a range of cutting widths, allowing users to choose the model that best suits their needs. The adjustable cutting height feature ensures that users can achieve the perfect lawn finish, whether they prefer a short trim or a longer grass setting. The series also incorporates a mulching system that finely chops clippings to nourish the soil, promoting a healthier lawn ecosystem.

Ease of use is a priority in the MTD Series 410 design. The ergonomic handles provide a comfortable grip, reducing fatigue during prolonged operation. Many models in the series are equipped with self-propelled functionality, making it effortless to maneuver across various terrains without excessive effort. Additionally, the intuitive control panel simplifies the operation, allowing users to make adjustments on-the-fly without diverting their attention from the task at hand.

For maintenance convenience, the MTD Series 410 shines with its easy-access components. Features like tool-free deck removal and accessible air filters simplify service, allowing users to perform routine maintenance with minimal hassle. This focus on user experience ensures that the equipment remains in peak condition over time, enhancing overall longevity and reliability.

In summary, the MTD Series 410 combines powerful performance, advanced cutting technology, and user-oriented design, making it a top choice in the realm of lawn care equipment. Whether users are maintaining a small garden or managing larger landscapes, this series provides a dependable solution that enhances productivity while ensuring an impeccable lawn. With its standout features and commitment to quality, the MTD Series 410 is truly a standout in modern outdoor power tools.
Top Page Image Contents