Upper and lower handles, Lower handle, Side

	Setup and	�
	Adjustment	�
	Adjustment

�

��

This Operators Manual covers a range of product specifications for various models. Characteristics and fea- tures discussed and/or illustrated in this manual may not be applicable to all models. MTD LLC reserves the right to change product specifications, designs, and equipment without notice and without incurring obligation.

1.	Remove any packing material which may be between
	upper and lower handles.
	a. Pull up and back on upper handle as shown in
	Figure 3-1. Make certain the lower handle is seated
	securely into the handle mounting brackets.
	b. Tighten star knobs securing upper handle to lower
	handle, Figure 3-1. Make sure that each carriage
	bolt is seated properly in the handle.
2.	Locate the hairpin clip on the weld pin on each side
	lower handle.

Stand behind the mower as if you were going to operate it. Your right hand corresponds to the right side of the mower; your left hand corresponds to the left side of the mower.

Make sure to route cable outside the lower handle. Do not crimp cable while lifting the handle up.

IMPORTANT

This unit is shipped with- out gasoline or oil in the engine. Fill up gasoline and oil as instructed in the accompanying engine manual BEFORE operat- ing your mower.

Figure 3-1: Unfold handle and tighten hardware.

�

��

Figure 3-2: Secure lower handle to mounting brackets.

�

� �

a.	Remove hairpin clip from this hole. Using a pair
	of pliers, insert hairpin clip into the hole on pin
	closest to the bracket, Figure 3-2. Repeat on other
	side.
b. Insert a carriage bolt from the hardware pack into
	the upper hole on the handle mounting bracket,
	Figure 3-2. Secure with one plastic wing nut, also
	included the hardware pack. Repeat on other side.
3. The rope guide is attached to the right side of the
upper handle. Loosen the wing nut which secures the
rope guide, Figure 3-3.
a.	Hold blade control handle against upper handle.
b. Pull starter rope out of the engine. Release blade
	control handle.
c.	Slip starter rope into rope guide.
d.	Tighten wing nut.
4. Insert post on cable ties into holes provided on the
lower handle. Pull cable tie tight and trim excess,
Figure 3-4.

Figure 3-3: Pull recoil starter through rope guide and tighten.

Figure 3-4: Secure cable to handle using cable ties.

Series 430 specifications

The MTD Series 430 is a versatile and robust line of lawn care equipment designed for both residential and professional users. Known for its reliability and cutting-edge technology, the Series 430 is an excellent choice for anyone looking to maintain their outdoor spaces efficiently.

One of the standout features of the MTD Series 430 is its powerful engine. The series is equipped with high-performance motors that deliver exceptional cutting power, making it easy to tackle even the toughest grass and foliage. With varying displacements available, users can choose the engine that best meets their mowing needs, providing an ideal balance of power and fuel efficiency for every user type.

The cutting deck of the MTD Series 430 combines durability with innovative design. Made from high-quality materials, the deck is built to withstand the rigors of regular use while ensuring a clean cut. The adjustable cutting height feature allows users to select their desired grass length with precision, making it suitable for various lawn types and conditions. This feature is essential for maintaining lawn health and aesthetics.

Another important aspect of the Series 430 is its user-friendly operation. These machines are designed with intuitive controls that make operating the equipment effortless, allowing even novice users to achieve professional-looking results. Additionally, the ergonomic design of the handles ensures comfort during prolonged use, reducing strain on the operator.

The MTD Series 430 also incorporates advanced technologies for enhanced performance. With its advanced mulching capabilities, the mower can finely chop grass clippings, returning nutrients to the soil and promoting a healthier lawn. Furthermore, some models in the series come equipped with easy-start technology, which ensures that starting the engine is a smooth and hassle-free experience.

For added convenience, the MTD Series 430 features easy-to-maintain designs, including accessible spindles and a quick-release cutting deck for effortless cleaning and maintenance. This practical focus extends to the overall build quality of the machines, ensuring longevity and reliability for years to come.

In summary, the MTD Series 430 is a top choice for those seeking a powerful, efficient, and user-friendly lawn care solution. With its advanced features, robust build quality, and focus on ease of use, it effectively meets the diverse needs of lawn enthusiasts and professionals alike, making yard maintenance a more manageable task.

Setup and

Adjustment