Programming
The standard settings listed in the chart can be altered. Several settings can be altered in succession.
|
|
|
|
|
Programme | Display | Setting | ||
P | 1 | OFF | the appliance will heat up | |
|
|
| ON | the appliance will not heat |
|
|
|
| up |
|
|
|
|
|
P | 2 | Audible tone volume | S1 to S4 | The higher the number, the |
|
|
|
| louder the audible tone |
|
|
|
|
|
P | 3 | Water hardness | 1 | Soft |
|
|
| 2 | Medium |
|
|
| 3 | Hard |
|
|
| 4 | Very hard |
|
|
|
|
|
|
|
|
|
|
* The factory default settings are shown in bold.
Proceed as follows:
Before you begin, ensure that the appliance is switched off.
^Press the function selector gently in and turn it
^Then release the function selector. "P1" will appear in the display.
^Turn the function selector until the programme you want to alter appears.
^Confirm your selection by pressing the function selector.
^Then turn the function selector until the setting you want appears.
^Confirm your selection by pressing the function selector.
^After you have altered the settings, press the function selector until the display goes out.
41
