MTD Series 400 warranty Operating, Your Lawn Mower

Page 9

To Stop Engine

1. Release the blade control handle to stop the engine and blade.

WARNING: The blade continues

�

 

to rotate for a few seconds after

 

the engine is shut off.

 

4

Operating

2. Disconnect and ground the spark plug wire as instructed in the separate engine manual to prevent accidental starting while equipment is unattended.

Using Your Lawn Mower

�

 

WARNING: Never operate your mower without either the rear door or the entire grass catcher assembly firmly secured.

�

�

Your Lawn

Mower

Be sure the lawn is clear of stones, sticks, wire, or other objects which could damage the lawn mower or the engine. Such objects could be accidently thrown by the mower in any direction and cause serious personal injury to the operator and others.

WARNING: If you strike a foreign object, stop the engine. Remove wire from the spark plug, thor- oughly inspect the mower for any damage, and repair the damage before restarting and operating the mower. Extensive vibration of the mower during operation is an indication of damage. The unit should be promptly inspected and repaired.

Operating Tips

1.For best results and effective mulching, do not cut wet grass.

2.New grass, thick grass, or wet grass may require a narrower cut.

3.For a healthier lawn, never cut off more than one-third of the total length of the grass.

4.Your lawn should be cut in the fall as long as there is growth.

5.Adjust ground speed according to condition of lawn.

6.If the grass has been allowed to grow in excess of 4 inches, mulching is not recommended. Mow using the grass catcher to reduce the grass height to 3-1/4 inches or less before mulching.

Figure 9

WARNING: Wait for the blade to stop completely before doing any work on the mower or to remove the grass catcher.

NOTE: To operate your unit using the grass catcher, mulcher or optional side discharge refer to page 7.

WARNING

The operation of any lawn mower can result in foreign objects being thrown into the eyes, which can damage your eyes severely. Always wear safety glasses while operating the mower, or while performing any adjustments or repairs on it.

Be sure no one other than the operator is standing near the lawn mower while starting engine or operating mower. Never run engine indoors or

in enclosed, poorly ventilated areas. En- gine exhaust contains carbon monoxide, an odorless and deadly gas. Keep hands, feet, hair and loose clothing away from any moving parts on engine and lawn mower.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Rotary Mower Model Series OPERATOR’S ManualTable of Contents Finding and Recording Model NumberCustomer Support Slope Gauge Your Responsibility SafeGeneral Operation Slope OperationGeneral Service ServiceSafe Operation Practices ChildrenSetup Adjustments Side discharge is an optional feature To remove grass catcher and utilize the mulching featureTo assemble the grasscatcher Attaching Grass Catcher to MowerKnow Your Lawn Mower Operating Your Lawn MowerYour Lawn Mower OperatingMaintenance Off-Season Storage Rear Flap ReplacementRemove blade and adapter from the crankshaft Tighten the hex bolt to the torque listed belowProblem Cause Remedy Trouble ShootingTWO Year Limited Warranty Warranty

Series 400 specifications

The MTD Series 400 is a cutting-edge line of equipment designed specifically for efficiency and versatility in outdoor maintenance. With design enhancements tailored for both residential and commercial users, the Series 400 stands out in its category thanks to its robust construction, user-friendly controls, and advanced technology.

One of the main features of the MTD Series 400 is its powerful engine. Equipped with an efficient four-stroke engine, it delivers exceptional performance while maintaining low emissions, making it environmentally friendly. This engine also ensures reliable operation across various terrains, from flat lawns to hilly regions, providing users with the confidence to tackle any outdoor task.

Another notable characteristic is the ergonomic design. The Series 400 incorporates adjustable handlebars and cushioned grips that promote comfort for extended use. This design consideration reduces fatigue and enhances user control, making it suitable for both novice and experienced users alike.

The Series 400 incorporates several advanced technologies that set it apart from competitors. For instance, its intuitive control panel simplifies operation, allowing users to easily switch between different settings without confusion. Moreover, the inclusion of a quick-start feature means users can get to work without unnecessary delays, enhancing overall productivity.

Durability is a hallmark of the MTD Series 400, with high-quality materials used throughout its construction. Reinforced components and weather-resistant finishes ensure that the equipment can withstand the rigors of outdoor use, thus extending its lifespan significantly.

One of the standout technologies in the Series 400 is its cutting system, which is optimized for precision and performance. This system allows for adjustable height settings, enabling users to achieve the desired grass length while promoting healthy lawn growth. This adaptability is crucial for meeting diverse gardening needs.

Additionally, the MTD Series 400 is designed with maintenance in mind. Its accessible components make routine checks and servicing straightforward, which is critical for ensuring long-term functionality and reliability.

In summary, the MTD Series 400 combines powerful performance, ergonomic design, advanced technology, and durability to meet the needs of outdoor maintenance. Whether for residential gardens or commercial landscapes, the Series 400 equips users with the tools needed to achieve optimal results efficiently and effectively.
Top Page Image Contents