MTD 500 thru 510 manual OPERATOR’S Manual

Page 1

OPERATOR’S MANUAL

Log Splitter

Model Series

500 thru 510

IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY

Warning: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved forest- covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box 368022 Cleveland, Ohio 44136-9722.

MTD PRODUCTS INC. P.O. BOX 368022 CLEVELAND, OHIO 44136-9722

PRINTED IN U.S.A.

FORM NO. 770-10509A.fm

 

(7/01)

Image 1
Contents OPERATOR’S Manual Table of Contents Training Important Safe Operation PracticesOperation Removing Unit From Crate Assembling Your LOG SplitterLoose Parts In Carton Assembling The TonguePreparing The Log Splitter Connecting the Cylinder to BeamAttaching The Tongue See Figure Control Handle Know Your LOG SplitterBeam Locks Engine ControlsGas And Oil Fill-Up Operating Your LOG SplitterStarting Engine Engines with choke leverUsing The Log Splitter Wedge Assembly Adjustment Adjusting Your LOG SplitterGib Adjustment Maintaining Your LOG SplitterBeam And Splitting Wedge Hydraulic FilterHose Clamps EngineStoring Your Log Splitter Conditions That will Void WarrantyProblem Cause Remedy TroubleshootingHydraulic Troubleshooting Page Model Series 500 thru Part Description Page Page MANUFACTURER’S Limited Warranty