Multiquip MB150, MB400B, MB1000W manual Pole Height Adjustment MBP, Pole Height Adjustment MBT

MOONLIGHT LIGHTING SYSTEM — SETUP

DANGER - Mounting Accessory Tipping

ALWAYS make sure that the mounting pole, cart, stand or tripod is properly secured to prevent tipping! Use sandbags or stakes to secure the mounting accessory as necessary.

MAST HEIGHT ADJUSTMENT (MBC and MBS)

1.To adjust the height of the mast on the MBC cart or MBS stand, rotate the winch handle until the mast is at the desired height (see Figure 28).

POLE HEIGHT ADJUSTMENT (MBP)

1.To adjust the height of the pole, loosen the height ad- justment knob (see Figure 27) on the MBP mounting pole and slowly pull up the inner pole to the desired height. Tighten the height adjustment knob.

PULL OUT

INNER POLE

TO ADJUST

HEIGHT

KNOB

ROTATE

WINCH HANDLE

Figure 28. MBC and MBS Mast Height Adjustment

CAUTION - Mast Safety

When raising or lowering the mast, keep hands and fingers clear of the various mast sections, this will prevent hands and fingers from getting pinched.

POLE HEIGHT ADJUSTMENT (MBT)

1.To adjust the height of the pole on the MBT tripod, re- move the pin that holds the pole in place and loosen the knob (see Figure 29). Adjust the pole to the desired height and tighten knob to secure pole. Put back the pin to lock pole in place.

Figure 27. MBP Pole Height Adjustment

CAUTION - Pole Safety

When raising or lowering the pole, keep hands and fingers clear of the section between the pole and the inner pole. This will prevent hands and fingers from getting pinched.

LOOSEN KNOB TO

ADJUST POLE HEIGHT

REMOVE PIN TO

RELEASE POLE

Figure 29. MBT Pole Height Adjustment

PAGE 22 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)