Moonlight Lighting System Components | Multiquip MB400B, MB150

MOONLIGHT LIGHTING SYSTEM — COMPONENTS

Figure 5 shows the location of the controls and components for the MOONLIGHT Lighting System. The function of each control is described below:

1.Balloon – This balloon is made of airtight PVC material with a diameter of 54 inches (MB400B, MB1000/W) or 33.5 inches (MB150).

2.Balloon Velcro Straps – Secures the balloon in place when attached to the support assembly (except 33.5- inch models).

3.BalloonSupportAssembly–Supports the balloon with the velcro straps in place (except 33.5-inch models).

4.Mounting Metal Rods – Used to hold balloon in the stand support adapter. Included with balloon support assembly on 54-inch models and included with balloon on 33.5-inch models.

5.Stand Support Adapter (with extrusion)– A pole that connects the balloon support assembly to the stand, to adjust the height of the balloon.

6.Adapter Bolt Lock – Secures the stand support adapter to the balloon support assembly when tightened.

7.Height Adjustment Knob – Adjusts the height of the pole (stand support adapter). When the pole is at the desired height, tighten lock to secure pole in place.

8.Stand – Supports the complete lighting system.

9.Wing Nut– Secures the stand into the base. Tighten screw to lock stand in place.

10.Metal Stand Base – Keeps the lighting system firmly set on the ground.

11.AC Power Cable – Connect this cable to a 120 VAC, 60 Hz power source.

12.ON/OFF Switch – Place this switch in the ON position to turn on the lamp.To turn off the lamp place in the OFF position. Please wait for approximately 10 minutes be- fore attempting to turn the lamp back on.

13.Ballast – Provides the necessary electronics to light the lamp.

14.Blower – Used to inflate the balloon.

15.Ballast Cable – Connects the ballast to the lamp assembly.

16.Snap Ring – Ensures a complete seal of the balloon when the lamp is attached.

17.Lamp Assembly – Screw lamp into this assembly. If lamp becomes difficult to screw into assembly or assem- bly is damaged, replace assembly.

18.Lamp – 1000-watt, 400-watt, or 150-watt metal-halide type lamp. Replace only with MQ recommended type lamp. Always allow a sufficient amount of time for the lamp to cool down before changing.

NOTE	Items 5 to 10 are part of the MBP Mounting Pole.The Moonlight Balloon can also be mounted
	to the MBC 4-wheel Generator Cart, MBS 2-Wheel Transport Stand, or the MBT Tripod
	(MB150 and MB400 only).

MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 15

MB1000, MB1000W, MB150, MB400, MB400B specifications

Multiquip has established itself as a leading manufacturer of construction equipment, renowned for its commitment to innovation and quality. Among its impressive lineup, the MB400B, MB400, MB150, MB1000W, and MB1000 stand out for their performance and versatility.

The Multiquip MB400B is engineered for high productivity and reliability in compact construction applications. This walk-behind concrete trowel features a robust engine, providing smooth operation and excellent surface finishing capabilities. With its durable construction and user-friendly design, the MB400B is suitable for both professionals and DIY enthusiasts who require precise finishing in decorative concrete work.

The MB400 shares many similarities with the MB400B but is distinguished by enhanced features for specific job site requirements. With a powerful engine and adjustable trowel speed, the MB400 excels in achieving high-quality finishes on industrial and commercial projects. Its lightweight design allows for maneuverability in tight spaces, ensuring optimal performance wherever needed.

On the other hand, the Multiquip MB150 is a compact trowel designed for smaller jobs, offering high maneuverability without sacrificing performance. The MB150 caters to contractors seeking a balance between size and power, making it ideal for residential applications. Its user-friendly controls ensure easy operation, and its construction offers durability to withstand the demands of everyday use.

The MB1000W is an advanced walk-behind trowel, featuring a powerful water-cooled engine that provides consistent performance across various conditions. Designed for larger paving jobs, it boasts enhanced stability and a wider trowel blade, promoting efficiency in achieving flawless concrete surfaces. The water-cooled engine ensures optimal operation even in challenging environments, making it a reliable choice for professionals.

Finally, the Multiquip MB1000 represents the pinnacle of trowel technology. This walk-behind model excels in high-performance applications, with precision-engineered components designed for maximum durability and efficiency. Its advanced control system allows for seamless adjustments during operation, delivering increased productivity on job sites. The MB1000 is ideal for heavy-duty tasks, making it a favorite among contractors requiring superior performance.

In summary, the Multiquip MB series, including the MB400B, MB400, MB150, MB1000W, and MB1000, combines innovative technology with robust design. Each model caters to specific user needs, bridging the gap between performance, efficiency, and ease of use—making Multiquip a trusted name in concrete finishing equipment.