Multiquip manual MT-74FA -TROUBLESHOOTING Guide, Operation not satisfactory

Page 21

MT-74FA —TROUBLESHOOTING GUIDE

TABLE 4. ENGINE TROUBLESHOOTING (continued)

	SYMPTOM	POSSIBLE PROBLEM	SOLUTION

	Operation not satisfactory

		Governor adjustment improper?	Adjust governor to correct level.

	Rotational speed fluctuates.	Governor spring defective?	Clean or replace ignition.

		Fuel flow erratic?	Check fuel line.
		Fuel flow erratic?	Check fuel line.

		Air taken in through suction	Check suction line.
		line?	Check suction line.
		line?
	Recoil starter not working	Dust in rotating part?	Clean recoil starter assembly.
	Recoil starter not working
	properly.	Spiral spring failure?	Replace spiral spring.
		Spiral spring failure?	Replace spiral spring.

TABLE 5. RAMMER TROUBLESHOOTING

	SYMPTOM	POSSIBLE PROBLEM	SOLUTION

		Operating speed of throttle lever	Set throttle lever to correct position.
		is incorrectly set?

		Oil in excess?	Drain excess oil. Bring to correct level.

	Engine runs but rammer jumps	Clutch slips?	Replace or adjust clutch.
	erratically or not at all.
	erratically or not at all.	Spring Failure?	Replace sprial spring.
		Spring Failure?	Replace sprial spring.

		Speed of engine improper?	Adjust engine speed to correct operating RPM setting.

		Soil over-compacted?	Shut down machine and test soil.

MT-74FA — OPERATION AND PARTS MANUAL — REV. #3 (11/08/07) — PAGE 21

Image 21

Contents Model MT-74FA MT-74FA Proposition 65 Warning MT-74FA Operation and Parts Manual REV. #3 11/08/07 MT-74FA -TABLE of Contents Order via Fax Dealers Only Best Deal! Order via Internet Dealers OnlyMT-74FA Safety Message Alert Symbols Rotating Parts Hazards MT-74FA Safety Message Alert SymbolsMT-74FA Rules for Safe Operation Transporting MT-74FA Rules for Safe OperationMachine Safety Decals MT-74FA Operation and Safety DecalsMT-74FA Operation and Safety Decals Construction of Tamping Rammer Definition of Tamping RammerRammer Gearbox and Spring Cylinder ControlsMT-74FA Specifications MT-74FA Rammer MT-74FA Controls and ComponentsMT-74FA Basic Engine Engine Rammer Gearbox and Spring Cylinder Oil BathInitial Start-up Inspection Stopping The Engine OperationMaintenance 200 300 Hours Pre-CleanerLong Term Storage MT-74FA -TROUBLESHOOTING Guide Operation not satisfactory MT-74FA -TROUBLESHOOTING GuideNO. Column Explanation of Code in Remarks ColumnPart NO. Column QTY. ColumnMT-74FA Rammer 3TO 5 Units MT-74FA Suggested Spare PartsMT-74FA- Nameplate and Decal Decal Mikasa MT-74FA- Nameplate and DecalMT-74FA Crankcase and Engine Assy Crankcase and Engine Assy Part Name MT-74FA Crankcase and Engine Assy Part Name MT-74FA Guide Cylinder and Foot Assy Sunk Head Bolt 12X95 H MT-74FA -TANK and Handle Assy Part Name QTY Remarks Robin EH-12-2D46420 Engine Crankcase and Cylinder Assy Robin EH-12-2D46420 Engine Crankcase and Cylinder Assy Robin EH-12-2D46420 Engine Crankshaft and Piston Assy Robin EH-12-2D46420 Engine Crankshaft and Piston Assy ROBINEH-12-2D46420ENGINE-MUFFLER,AIR CLEANER,CAM&CARB.ASSY ROBINEH-12-2D46420ENGINE-MUFFLER,AIR CLEANER,CAM&CARB.ASSY Robin EH-12-2D46420 Engine Governor Assy Governor Lever CP Robin EH-12-2D46420 Engine -RECOIL Starter and Blower Assy DECAL, M-MARK Robin EH-12-2D46420 Engine Magneto Assy Flywheel CP Robin EH-12-2D46420 Engine Carburetor Assy Screen Inlet Freight Policy Terms and Conditions of Sale PartsMT-74FA Operation and Parts Manual REV. #3 11/08/07 Heres HOW to GET Help