Multiquip manual MT-74FA Rules for Safe Operation

Page 8

MT-74FA — RULES FOR SAFE OPERATION

 

DANGER

Read this manual!

 

 

 

Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.

The following safety guidelines should always be used when operating the MT-74FA Tamping Rammer:

GENERAL SAFETY

■DO NOT operate or service this equipment before reading this entire manual.

■This equipment should not be operated by persons under 18 years of age.

■NEVER operate this equipment without proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job.

■NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine.

■NEVER operate this equipment under the influence of drugs or alcohol.

■ALWAYS wear proper respiratory (mask), hearing and eye protection equipment when operating the rammer.

■Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

■Manufacturer does not assume responsibility for any accident due to equipment modifications.

■NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

■NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before servicing

engine or rammer.

■High Temperatures – Allow the engine to cool before adding fuel or performing service and maintenance functions. Contact with hot! components can cause serious burns.

■The engine section of this rammer requires an adequate free flow of cooling air. NEVER operate the rammer in any enclosed or narrow

area where free flow of the

air is restricted. If the air flow is restricted it will cause serious damage to the rammer or engine and may cause injury to people. Remember the rammer's engine gives off DEADLY carbon monoxide gas.

■ALWAYS refuel in a well-ventilated area, away from sparks and open flames.

■ALWAYS use extreme caution when working with flammable liquids. When refueling, stop the engine and allow it to cool. DO NOT smoke around

or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

■NEVER operate the rammer in an explosive atmosphere or near

combustible materials. An explosion or fire could result causing severe bodily harm or even death.

■DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapors, or if fuel is spilled on a hot engine.

■Topping-off to filler port is dangerous, as it tends to spill fuel.

■Stop the engine when leaving the rammer unattended.

■Maintain this equipment in a safe operating condition at all times.

PAGE 8 — MT-74FA — OPERATION AND PARTS MANUAL — REV. #3 (11/08/07)

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model MT-74FA MT-74FA Proposition 65 Warning MT-74FA Operation and Parts Manual REV. #3 11/08/07 MT-74FA -TABLE of Contents Best Deal! Order via Internet Dealers Only Order via Fax Dealers OnlyMT-74FA Safety Message Alert Symbols MT-74FA Safety Message Alert Symbols Rotating Parts HazardsMT-74FA Rules for Safe Operation MT-74FA Rules for Safe Operation TransportingMT-74FA Operation and Safety Decals Machine Safety DecalsMT-74FA Operation and Safety Decals Definition of Tamping Rammer Construction of Tamping RammerRammer Gearbox and Spring Cylinder ControlsMT-74FA Specifications MT-74FA Controls and Components MT-74FA RammerMT-74FA Basic Engine Rammer Gearbox and Spring Cylinder Oil Bath EngineInspection Initial Start-upOperation Stopping The EngineLong Term Storage Maintenance200 300 Hours Pre-Cleaner MT-74FA -TROUBLESHOOTING Guide MT-74FA -TROUBLESHOOTING Guide Operation not satisfactoryExplanation of Code in Remarks Column NO. ColumnPart NO. Column QTY. ColumnMT-74FA Suggested Spare Parts MT-74FA Rammer 3TO 5 UnitsMT-74FA- Nameplate and Decal MT-74FA- Nameplate and Decal Decal MikasaMT-74FA Crankcase and Engine Assy Crankcase and Engine Assy Part Name MT-74FA Crankcase and Engine Assy Part Name MT-74FA Guide Cylinder and Foot Assy Sunk Head Bolt 12X95 H MT-74FA -TANK and Handle Assy Part Name QTY Remarks Robin EH-12-2D46420 Engine Crankcase and Cylinder Assy Robin EH-12-2D46420 Engine Crankcase and Cylinder Assy Robin EH-12-2D46420 Engine Crankshaft and Piston Assy Robin EH-12-2D46420 Engine Crankshaft and Piston Assy ROBINEH-12-2D46420ENGINE-MUFFLER,AIR CLEANER,CAM&CARB.ASSY ROBINEH-12-2D46420ENGINE-MUFFLER,AIR CLEANER,CAM&CARB.ASSY Robin EH-12-2D46420 Engine Governor Assy Governor Lever CP Robin EH-12-2D46420 Engine -RECOIL Starter and Blower Assy DECAL, M-MARK Robin EH-12-2D46420 Engine Magneto Assy Flywheel CP Robin EH-12-2D46420 Engine Carburetor Assy Screen Inlet Terms and Conditions of Sale Parts Freight PolicyMT-74FA Operation and Parts Manual REV. #3 11/08/07 Heres HOW to GET Help
Top Page Image Contents