Lubrication Oil, Fuel | Multiquip GA-6HZ specs

Lubrication Oil

Fill the engine crankcase with lubricating oil through the filler hole, but do not overfill. Make sure the generator is level. With the dipstick inserted all the way, but without being screw into the filler hole, verify that the oil level is maintained between the two notches on the dipstick.

The oil listed in Table 3 is recommended to ensure better engine performance. Use class SC or higher grade motor oil.

NOTE

This HONDA engine is equipped with a low oil shutdown capability. A built in sensor will automatically turn off the engine should the oil level fall below a safe operating condition. Make sure the generator is placed on level ground. Placing the generator on level ground will ensure that the low oil sensor will function properly.

GA-6HZ— PRE-SETUP

Fuel

Close the fuel cock before filling the tank. Fill the fuel tank with clean and fresh unleaded gasoline. Do not fill the tank beyond capacity.

Pay attention to the fuel tank capacity when replenishing fuel. Refer to the fuel tank capacity listed on page 8 Specification Table1.

The fuel tank cap must be closed tightly after filling.

Handle fuel in a safety container. If the container does not have a spout, use a funnel.

CAUTION :

Never fill the fuel tank while the engine is running or in the dark. Gasoline spillage on a hot engine can cause a fire or explosion. If gasoline spillage occurs, wipe

Table 3. Recommended Motor Oil

Temperature	Type Oil
Range	Type Oil
Range

104° F ~ 23° F	SAE 30
(40° C ~ -5°C)	SAE 30
(40° C ~ -5°C)

23° F ~ 5° F	SAE 20 or SAE	10W-30
(-5° C ~ -15°C)	SAE 20 or SAE	10W-30
(-5° C ~ -15°C)

Below 5° C (-15°)

SAE 10W or SAE 10W-30

GA-6HZ A.C. GENERATOR — PARTS & OPERATION MANUAL — REV. #4 (10/08/04) — PAGE 13

GA-6HZ specifications

The Multiquip GA-6HZ is a robust and versatile generator designed for reliability and efficiency in various applications. Known for its powerful performance, the GA-6HZ is widely used in construction, events, and other high-demand environments where a consistent power supply is crucial.

One of the standout features of the GA-6HZ is its impressive engine, powered by a reliable Honda GX390. This air-cooled engine boasts a powerful output, providing ample power for a wide range of tools and equipment. The sturdy construction of the generator ensures it can withstand harsh job site conditions while delivering exceptional performance.

The GA-6HZ is equipped with a 6 kW maximum output, making it suitable for powering multiple devices simultaneously. The generator features both 120V and 240V outlets, allowing for versatile applications. The inclusion of a duplex outlet and a twist-lock outlet further enhances its usability, making it capable of meeting various power demands.

In terms of technology, the GA-6HZ employs a sophisticated alternator design that minimizes voltage fluctuations, ensuring stable power delivery even under varying loads. The generator also features an automatic voltage regulator (AVR) that enhances the efficiency and consistency of operation. This technology contributes significantly to the generator’s reliability, as it protects sensitive electronics from fluctuations that could cause damage.

Portability is another key characteristic of the GA-6HZ. It is designed with a compact footprint and features built-in lifting handles, making transportation to and around job sites convenient. Additionally, the generator is equipped with a large fuel tank that allows for extended run times, further minimizing downtime during crucial projects.

Another notable characteristic is its user-friendly control panel. The GA-6HZ features clearly labeled controls and gauges, allowing operators to monitor performance easily. The generator also has multiple safety features, including a low oil shutdown, ensuring that it operates smoothly without risking damage or safety hazards.

In summary, the Multiquip GA-6HZ stands out as a highly reliable and efficient generator, suitable for various demanding applications. With a powerful engine, versatile output options, advanced technology, and user-friendly features, it remains a popular choice among professionals seeking dependable power solutions.