en
Description of the Powerbrush
The beater bar in the Powerbrush is driven by a motor. Two of the four rollers are
Recommended use
Do not use the Powerbrush on high quality, hand knotted rugs, for example Berber or Persian rugs, as well as extremely long piled area rugs and carpets. There is a danger of the threads being pulled out. Turn the Powerbrush off to vacuum these types of floor coverings and use only suction.
The Powerbrush is particularly suitable for cleaning and restoring crushed carpet pile of wall to wall carpeting and floor coverings subject to hard wear, especially in high traffic areas.
To clean hard flooring, it is better to use the floor brush.
Observe the cleaning instructions of the floor manufacturer.
Using the Powerbrush
For best results, move the Powerbrush slowly back and forth over the carpet.
Carpet fringes can be brushed flat if you carefully glide the Powerbrush in the proper direction (from the carpet toward the floor).
Connecting the Powerbrush
To connect the Powerbrush to your vacuum cleaner refer to the illustrations at the end of these Operating Instructions.
Height adjustment
To help better care for your flooring, you can select one of 5 brush distances from the floor. The selected setting will be displayed.
Setting 1 - closest to the floor
Setting 5 - highest distance from the floor
Press the foot switch (as shown) until you reach the desired setting.
Releasing the suction elbow
Press the release button and remove the intake socket.
5