Marantz PM7001KI manual Troubleshooting, Before considering it as a failure

Page 19

ENGLISH

TROUBLESHOOTING

7Before considering it as a failure

In case of trouble with this component, first check the following before calling for service.

What seems to be a serious malfunction is often due to a simple operation mistake.

If the trouble is not fixed after making the following checks, contact the place of purchase, your nearest Marantz dealer, our customer service center, or our repair service center.

* Power does not turn ON.

1.Is the power cable plugged securely into the power outlet?

2.Isn’t the STANDBY indicator above the POWER ON/OFF button lit? Either turn the INPUT SELECTOR knob, or press the MAIN POWER ON button on the remote controller.

3.If the STANDBY indicator is flashing, the protective circuit has been activated. Switch the PM7001’s POWER ON/OFF button to the OFF position, wait for more than a minute, and then turn the power back ON.

* Nothing is heard from the speakers.

1.Aren’t the SPEAKER 1 and 2 buttons on the front panel in the OFF position?

2.Isn’t the MUTE function activated?

3.Did you make a mistake selecting the input source using the INPUT SELECTOR knob on the front panel?

4.Are you using the component correctly?

5.Are connection cables and speaker cables securely connected.

6.Is the SEPARATE switch on the rear panel set correctly?

7.The volume may have been muted by the protective circuit activated. Try adjusting the volume level again.

* Record player audio is not heard, or contains a lot of noise.

1.Are the PHONO plugs connected correctly?

2.Connect the grounding wire from the record player to the PHONO GND terminal.

3.Is the cartridge connected properly to the tone arm?

4.Sometimes plugging the record player’s power cable into the power outlet with the polarity reversed can reduce noise.

7About the Protective Circuit

The PM7001 is equipped with a protective circuit to protect the amplifier circuits and speaker system against damage.

If the protective circuit is activated, the sound is instantly muted. In this case, either the MUTE indicator in the center of the panel flashes, or the STANDBY indicator above the POWER ON/OFF button flashes.

•At Power On

For about 8 seconds after the power is turned on, the protective circuit is activated muting the sound to give the amplifier circuits time to stabilize. Once the amplifier circuits stabilize, the protective circuit releases and audio is enabled.

•In the Event of Overcurrent

The protective circuit is activated if current exceeding a certain level is detected, which can happen if excessive signal flow is input to the amplifier or if the PM7001 is connected to a speaker system of less than 4Ω impedance. The protective circuit is also activated if a speaker cable shorts.

In these cases, the MUTE indicator in the center of the panel flashes, and the volume is automatically reduced. Approximately 15 seconds later the protective circuit is released, therefore the volume needs readjusting to continue normal use.

Moreover, if the overcurrent continues, the amplifier’s power shuts OFF and the STANDBY indicator above the POWER ON/OFF button flashes.

•If excessive ultra-bass signals are input

The protective circuit is also activated if ultra-bass signals that exceed the base signal range settings are input.. In this case, the MUTE indicator in the center of the panel flashes, and the volume is automatically reduced. Approximately 15 seconds later, the protective circuit is released, therefore the volume needs readjusting to continue normal use. If excessive ultra- bass signal input continues or if DC voltage is detected due to trouble with the amplifier, the power shuts OFF and the STANDBY indicator above the POWER ON/OFF button flashes.

•If the Main-amplifier Overheats

The protective circuit is activated if the temperature of the main- amplifier section rises above a certain level, which can happen if the amplifier is continually used with excessive signal flow being input into it. The protective circuit is also activated when the set operating temperature is exceeded, which can happen if the vents on top of the amplifier are covered, or if the amplifier is installed on a cramped audio rack. In these cases, the MUTE indicator in the center of the panel flashes, and the volume is automatically reduced. Approximately 15 seconds later, the protective circuit is released, therefore the volume needs readjusting to continue normal use.

If the temperature does not sufficiently lower within a certain amount of time after the protective circuit activation, the power shuts OFF and the STANDBY indicator above the POWER ON/OFF button flashes.

•In the Event of Amplifier Trouble

The protective circuit is activated and the power is automatically shut OFF if an abnormality is detected in the power circuit. The same happens if the main fuse inside the amplifier blows. In these cases, the STANDBY indicator above the POWER ON/OFF button flashes.

14

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Model PM7001 / PM7001 KI User Guide English CE Marking Advertencias Contents Before USE Equipment Mains Working SettingCopyright PM7001 KI Version Features FeaturesBI-WIRING Connection Wiring Speaker CableBefore Making Connections Connection Example Basic Connection for Stereo Playback ConnectionsRecord Player To Line OUT jacks CD player Set to OFF To power outletSpeaker Main-amplifier To input jacksFront Panel Names and Functions of PartsRear Panel Component operating buttons Power ON/OFF buttonsVolume adjustment buttons Input selector buttonsDVD TunerTape On the front of the PM7001 Approx m For use of Remote controllerOperatable range of Remote controller Loading batteriesDisc Playback on an Analog Record Player Basic OperationPlayback Disc Playback on an CD PlayerSet to on HOW to USE and SET FeaturesUse a bi-wiring connection pg for speakers Main in JacksFor details connecting the speakers, see Remote Control JacksAbout the Protective Circuit TroubleshootingIs the power cable plugged securely into the power outlet? Before considering it as a failureOthers Specifications & Dimensional DrawingsRepairs 07/2005 00M14AJ851310 mzt-d

PM7001KI specifications

The Marantz PM7001KI is a high-performance integrated amplifier that exemplifies the brand's dedication to audio excellence. Designed as part of the Special Edition series, it serves as a tribute to the legendary audio engineer Ken Ishiwata, who significantly contributed to Marantz's legacy. This amplifier combines both elegance and power, making it an attractive choice for audiophiles seeking superior sound quality.

One of the standout features of the PM7001KI is its robust power output. With a continuous power rating of 70 watts per channel into 8 ohms, and even more at lower impedances, this amplifier can drive a variety of speakers with ease. The current feedback amplifier design, a hallmark of Marantz engineering, ensures that the PM7001KI delivers a fast response time and a wide frequency range, resulting in crystal-clear highs and deep, rich lows.

The amplifier is equipped with a vast array of connectivity options. It includes multiple line inputs for additional components, a dedicated phono stage for vinyl aficionados, and a pre-out feature that allows for the connection of separate power amplifiers. This versatility ensures that the PM7001KI can seamlessly integrate into any audio setup.

In terms of build quality, the PM7001KI does not disappoint. It boasts a sturdy chassis designed to minimize vibrations, shielding the internal components from interference. The use of high-quality capacitors and a precision-engineered volume control further enhances the audio experience, providing cleaner, undistorted sound at any volume level.

Another notable technology employed in the PM7001KI is the innovative HDAM (Hyper Dynamic Amplifier Module) circuit, which replaces the conventional operational amplifiers found in many amplifiers. This technology improves audio performance by minimizing noise and increasing dynamic range, leading to a more engaging listening experience.

In summary, the Marantz PM7001KI Integrated Amplifier is a perfect fusion of power, precision, and versatility. Its dedication to exceptional sound quality, combined with a stylish design and comprehensive features, makes it an ideal choice for serious music lovers. Whether listening to classical, jazz, or rock, the PM7001KI ensures that every note is delivered with clarity and impact, staying true to Marantz's commitment to quality audio for decades.
Top Page Image Contents