Mega Catch MCP800 operation manual Stand Assembly Instructions, Trap Assembly Instructions

Page 9

Stand Assembly Instructions

To assemble the Stand supplied with the Trap, follow the instructions shown in figure 2 below.

Fix external skirt then tip the Trap on its side and slide onto hook.

Wind direction

Fit top section over bottom section of upright - then fit bolt and tighten firmly

FIG 2 - Trap Assembly Instructions

Assemble stand base components as illustrated here - fit all bolts and washers before tightening bolts firmly. Screw feet into bottom of stand base.

3 x 4" Wire staples are supplied to secure frame to ground.

NOTE: For optimum performance place the trap in a predominantly shaded area (located between your dwelling and the source of the mosquitoes) which is protected from rain and wind. (Mosquitoes do not fly in strong winds or severe weather conditions.)

For maximum stability the 'U' shaped leg at the back of the stand should be pointed in the direction of prevailing winds. The wire staples supplied with the trap (or a cinder block placed on the back of the stand) can be used to increase stability.

7

Image 9

Contents Mosquito Trap Contents Important Safety Instructions Introduction Features of Mega-Catch Premier Mosquito TrapInitial Set Up Instructions What Your Mega-Catch Mosquito Trap Will Do Then plug into the power supplyInstallation of Trap Installing and Siting the Mega-Catch Mosquito TrapInitial Set Up Instructions section Trap PositioningPage Trap Assembly Instructions Stand Assembly InstructionsHow to Program Operation of the Programmable TimerMega Catch Mega CatchThen Press Clock to Return to Normal Operation Mosquito Catching Systems Using the Liquid Catch ContainerFitting of Catch Bag Using the Catch BagFitting of External Skirt Method OneFitting External Skirt Method Two Care of Your TrapRemoval of Fan Safety Guard Replacement of U.V. BlubMega-Catch Octenol Fragrance Strip Placement Position for Mega-Catch Octenol Fragrance StripOptional Accessories Battery Terminal Power CableCigarette Lighter/Car Accessory Terminal Cable Opening the Trap refer to figure Maintenance and Repair of Your TrapReinstallation of Plates Replacement of U.V. Bulb refer to figureConnection of Wires Re-assembly of TrapOpening the Premier Trap To Remove the Timer Unit refer to figure Removal of TimerHow often do I need to operate my Mega-Catch Mosquito Trap? Frequently Asked QuestionsWill Mega-Catch Mosquito Traps catch biting flies? Can I stop my Mega-Catch Mosquito Trap from catching moths?Problem Solving Need Help? SpecificationsIf your Mega-Catch Mosquito Trap fails to operate Description Parts List