Mantis Hedge Trimmer E System owner manual Important Note

Page 5

wrenches are removed from the tool before turning it on.

14.Avoid unintentional starting.

Do not carry a plugged in tool with a finger on the switch trigger. Ensure switch is off when plugging in.

15.Use outdoor extension leads.

When tool is used outdoors, use only extension cords intended for outdoor use.

16.Important extension cord information:

a.Make sure the extension cords are in good condition before use.

b.Based on the total length of cord that you are going to use, check the chart to make sure the cord meets the correct minimum cord gauge (AWG) requirements.

IMPORTANT NOTE:

Using an undersized cord or a larger number cord gauge (AWG) than recommended in the chart, will cause a loss in power and overheating of the unit. Using a smaller number cord gauge (AWG) than recommended in the chart, is acceptable.

Extension cord chart (minimum cord gauge (AWG))

Length (metres)

.3 to 7.8

7.9 to 15.5

15.6 to 30.6

30.7 to 45.7

 

 

 

 

 

Cord gauge (AWG)

18

16

14

12

 

 

 

 

 

17.Stay alert.

Watch what you are doing. Use common sense. Do not operate tool when you are tired, ill or under the influence of alcohol or other drugs.

18.Check damaged parts.

Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function.

Check for alignment of moving parts, free running of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre unless otherwise indicated in this instruction manual. Have defective switches replaced by an authorised service facility. Do not use the tool if the switch does not turn it on and off.

Don’t operate the machine with a damaged or excessively worn cutting device.

WARNING – DANGER

LITTLE WONDER WILL NOT BE RESPONSIBLE FOR THE FAILURE OF CUTTING DEVICES OR ACCESSORIES THAT HAVE NOT BEEN TESTED AND APPROVED FOR USE WITH THIS UNIT. USE ONLY MANUFACTURER-RECOMMENDED REPLACEMENT PARTS.

19.The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury.

20.Have your tool repaired by a qualified person.

This electric tool conforms to relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.

21.Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

22.Work only in daylight or in good artificial light.

23.Keep all guards attached at all times when unit is operated.

24.Always use the shoulder strap.

Adjust the strap for comfort before starting the engine.

25.Secure unit during transport to prevent damage or injury.

26.Machine should not be used in any position that causes any part to come within 3 metres of overhead electrical lines. Always be aware of overhead power lines.

27.Always keep a firm grip on both handles when motor is running: one hand grasps the front “loop” handle while the other hand grasps the rear handle. Severe injuries can result if you try to use this machine with only one hand or with an insecure grip.

28.Thoroughly inspect the area where equipment is to be used and removed all objects, which can be thrown by the machine.

29.Always keep area clear of children, pets, and bystanders.

30.Always inspect your unit before each use and ensure that all handles, guards and fasteners are secure, operating, and in place. Be sure that all electrical cords are not damaged or broken.

31.Always maintain and examine your attachments with care. Follow maintenance instructions given in manual.

32.Don’t attempt to repair any part of the extended reach “E” system. Have repairs made by a qualified repairman. See that only original “Mantis” parts are used.

33.Maintain a firm footing and good balance, do not overreach while trimming. Before you start to trim, check

4

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Page Safety and warnings Table of contents Important informationSafety labels For safe operations General safety rulesImportant Note Balancing the Unit Attaching the Hedge TrimmerTrimming Adjusting the blade angleBlades adjustment Service maintenance guide MaintenanceLubrication StorageHedge trimmer E System exploded view Hedge trimmer E System parts list Mantis REV B

Hedge Trimmer E System specifications

The Mantis Hedge Trimmer E System is a revolutionary gardening tool designed for both amateur and professional gardeners who seek efficiency and precision in their hedge trimming tasks. This state-of-the-art electric trimmer combines powerful performance with user-friendly features, making it an ideal choice for maintaining the aesthetics and health of your garden.

One of the standout features of the Mantis Hedge Trimmer E System is its lightweight design, which ensures ease of use during extended periods of gardening. Weighing significantly less than traditional gas-powered hedge trimmers, it minimizes user fatigue, allowing gardeners to navigate effortlessly around shrubs and hedge lines. The trimmer is designed for comfort, featuring an ergonomic handle that provides a secure grip, further enhancing maneuverability.

The Mantis Hedge Trimmer utilizes a high-performance electric motor that delivers consistent power without the noise and emissions associated with gas engines. This not only contributes to a more environmentally friendly gardening experience but also eliminates the need for fuel mixing and maintenance, which typically accompany gas-powered equipment. The electric motor ensures that users can work efficiently and quietly, making it suitable for use in residential areas without disturbing neighbors.

Equipped with dual-action blades, the Mantis Hedge Trimmer E System produces cleaner cuts and reduces the risk of blade snagging. The blades are made from high-quality steel, ensuring durability and longevity. With a cutting capacity that accommodates various hedge sizes, this trimmer can handle everything from delicate foliage to thicker branches, making it a versatile tool for any garden.

Another innovative feature of the Mantis Hedge Trimmer is its adjustable cutting angle. This allows users to achieve precise cuts at different heights and angles, making it easier to shape hedges and maintain their health. The telescopic handle extension gives gardeners added reach without sacrificing control or stability.

In addition to its performance features, safety is a top priority in the design of the Mantis Hedge Trimmer E System. It includes a safety switch that prevents accidental activation, ensuring that users can operate the trimmer with confidence. The tool also has a built-in blade guard that protects the user from any debris that may be ejected during operation.

In summary, the Mantis Hedge Trimmer E System brings together power, versatility, and safety in a lightweight and environmentally friendly package. Whether you are shaping a formal hedge or manicuring your garden, this trimmer is an essential addition to your gardening toolkit. With its exceptional performance and innovative features, the Mantis Hedge Trimmer revolutionizes the way you maintain your outdoor spaces, making hedge trimming an enjoyable and efficient task.
Top Page Image Contents