Mantis Hedge Trimmer E System owner manual Attaching the Hedge Trimmer, Balancing the Unit

Page 6

the work area for obstacles that might cause you to lose your footing, balance or control of the machine. While operating the machine always be sure of a safe and secure operating position especially when using steps or a ladder. Always be sure of your footing on slopes.

WARNING – DANGER

IMPROPER ASSEMBLY OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY. MAKE SURE TO FOLLOW ALL INSTRUCTIONS CAREFULLY. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR LOCAL AUTHORISED MANTIS DEALER.

34.Always disconnect power cord from power source:

a.Before cleaning blockages.

b.Before checking, cleaning or working on the cutting portion of the unit.

c.After striking a foreign object: inspect the cutting part for damage and make repairs before restarting and operating the unit.

d.If machine starts to vibrate abnormally (check immediately).

e.Whenever you leave the unit.

35.Securing the extension cord.

Bend the extension cord about 40cm from the plug end. Push that bend through the oblong opening, then loop the bend under the cord retaining clips as shown. This will prevent the extension cord from detaching from the hedge trimmer plug.

Attaching the Hedge Trimmer

No tools are required to attach the Hedge Trimmer to the power head.

1.Pull the spring pin up on the adapter of the power head shaft assembly.

2.Carefully fit hedge trimmer drive shaft into adapter, making sure that male spline of the inner drive shaft engages into the female spline socket of the power head shaft. (Picture 1)

3.When the drive shaft is properly aligned, the spring pin will drop into the hole on the shaft of the hedge trimmer attachment. A click should be heard when completed.

4.Insure two shaft parts are fully engaged by twisting them. Full engagement will prevent shaft rotation.

5.Secure assembly by tightening the knob. (Picture 2)

6.Unit handles can be re-adjusted to the operator’s preference by simply loosening the screws and sliding handles up or down the shaft.

Picture 1

Picture 2

Balancing the Unit

Check the balance of the assembled unit. The handles and shoulder harness have been assembled at the factory and set according to the average size person. This can be adjusted to the operator’s preference by simply loosening the screws and sliding the handle up or down the shaft. Make sure to retighten the screws before operating hedge trimmer.

5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Page Table of contents Important information Safety and warningsSafety labels General safety rules For safe operationsImportant Note Attaching the Hedge Trimmer Balancing the UnitAdjusting the blade angle TrimmingBlades adjustment Lubrication MaintenanceService maintenance guide StorageHedge trimmer E System exploded view Hedge trimmer E System parts list Mantis REV B

Hedge Trimmer E System specifications

The Mantis Hedge Trimmer E System is a revolutionary gardening tool designed for both amateur and professional gardeners who seek efficiency and precision in their hedge trimming tasks. This state-of-the-art electric trimmer combines powerful performance with user-friendly features, making it an ideal choice for maintaining the aesthetics and health of your garden.

One of the standout features of the Mantis Hedge Trimmer E System is its lightweight design, which ensures ease of use during extended periods of gardening. Weighing significantly less than traditional gas-powered hedge trimmers, it minimizes user fatigue, allowing gardeners to navigate effortlessly around shrubs and hedge lines. The trimmer is designed for comfort, featuring an ergonomic handle that provides a secure grip, further enhancing maneuverability.

The Mantis Hedge Trimmer utilizes a high-performance electric motor that delivers consistent power without the noise and emissions associated with gas engines. This not only contributes to a more environmentally friendly gardening experience but also eliminates the need for fuel mixing and maintenance, which typically accompany gas-powered equipment. The electric motor ensures that users can work efficiently and quietly, making it suitable for use in residential areas without disturbing neighbors.

Equipped with dual-action blades, the Mantis Hedge Trimmer E System produces cleaner cuts and reduces the risk of blade snagging. The blades are made from high-quality steel, ensuring durability and longevity. With a cutting capacity that accommodates various hedge sizes, this trimmer can handle everything from delicate foliage to thicker branches, making it a versatile tool for any garden.

Another innovative feature of the Mantis Hedge Trimmer is its adjustable cutting angle. This allows users to achieve precise cuts at different heights and angles, making it easier to shape hedges and maintain their health. The telescopic handle extension gives gardeners added reach without sacrificing control or stability.

In addition to its performance features, safety is a top priority in the design of the Mantis Hedge Trimmer E System. It includes a safety switch that prevents accidental activation, ensuring that users can operate the trimmer with confidence. The tool also has a built-in blade guard that protects the user from any debris that may be ejected during operation.

In summary, the Mantis Hedge Trimmer E System brings together power, versatility, and safety in a lightweight and environmentally friendly package. Whether you are shaping a formal hedge or manicuring your garden, this trimmer is an essential addition to your gardening toolkit. With its exceptional performance and innovative features, the Mantis Hedge Trimmer revolutionizes the way you maintain your outdoor spaces, making hedge trimming an enjoyable and efficient task.
Top Page Image Contents