Mantis Pruner E System manual

Extension cord chart (minimum cord gauge (AWG)

Length (metres)	.3 to 7.8	7.9 to 15.5	15.6 to 30.6	30.7 to 45.7

Cord gauge (AWG)	18	16	14	12

17.Stay alert.

Watch what you are doing. Use common sense. Do not operate tool when you are tired, ill or under the influence of alcohol or other drugs.

18.Check damaged parts.

Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function.

Check for alignment of moving parts, free running of moving parts, breakage of parts, mounting and any other conditions that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre unless otherwise indicated in this instruction manual. Have defective switches replaced by an authorised service facility. Do not use the tool if the switch does not turn it on and off.

Don’t operate the machine with a damaged or excessively worn cutting device.

WARNING – DANGER

LITTLE WONDER WILL NOT BE RESPONSIBLE FOR THE FAILURE OF CUTTING DEVICES OR ACCESSORIES THAT HAVE NOT BEEN TESTED AND APPROVED FOR USE WITH THIS UNIT. USE ONLY MANUFACTURER-RECOMMENDED REPLACEMENT PARTS.

19.The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury.

20.Have your tool repaired by a qualified person.

This electric tool conforms to relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.

21.Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.

22.Work only in daylight or in good artificial light.

23.Keep all guards attached at all times when unit is operated.

24.Always use the shoulder strap.

Adjust the strap for comfort before starting the engine.

25.Secure unit during transport to prevent damage or injury.

26.Machine should not be used in any position that causes any part to come within 3 metres of overhead electrical lines. Always be aware of overhead power lines.

27.Always keep a firm grip on both handles when motor is running: one hand grasps the front “loop” handle while the other hand grasps the rear handle. Severe injuries can result if you try to use this machine with only one hand or with an insecure grip.

28.Thoroughly inspect the area where equipment is to be used and removed all objects, which can be thrown by the machine.

29.Always keep area clear of children, pets, and bystanders.

30.Always inspect your unit before each use and ensure that all handles, guards and fasteners are secure, operating, and in place. Be sure that all electrical cords are not damaged or broken.

31.Always maintain and examine your attachments with care. Follow maintenance instructions given in manual.

32.Don’t attempt to repair any part of the extended reach “E” system. Have repairs made by a qualified repairman. See that only original “Mantis” parts are used.

33.Maintain a firm footing and good balance, do not overreach while trimming. Before you start to trim, check the work area for obstacles that might cause you to lose your footing, balance or control of the machine. While operating the machine always be sure of a safe and secure operating position especially when using steps or a ladder. Always be sure of your footing on slopes.

WARNING – DANGER

IMPROPER ASSEMBLY OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY. MAKE SURE TO FOLLOW ALL INSTRUCTIONS CAREFULLY. IF YOU HAVE ANY QUESTIONS, CONTACT YOUR LOCAL AUTHORISED MANTIS DEALER.

34.Always disconnect power cord from power source:

a.Before cleaning blockages.

b.Before checking, cleaning or working on the cutting portion of the unit.

c.After striking a foreign object: inspect the cutting part for damage and make repairs before restarting and operating the unit.

d.If machine starts to vibrate abnormally (check immediately).

e.Whenever you leave the unit.

Pruner E System specifications

The Mantis Pruner E System is an innovative gardening solution that redefines the way we maintain our gardens and landscapes. Designed for both amateur gardeners and professional landscapers, this advanced pruning system combines ergonomic design with cutting-edge technology to provide exceptional efficiency and ease of use.

One of the main features of the Mantis Pruner E System is its electric motor. This system operates quietly and efficiently, reducing the fatigue often associated with traditional manual pruning tools. The electric motor ensures precise cutting, allowing users to tackle even the most complicated pruning tasks without straining their hands or wrists. The lightweight design further enhances usability, enabling hours of comfortable operation.

The E System also incorporates a unique blade technology. Built from high-quality, hardened steel, these blades are engineered for durability and sharpness. They are designed to handle branches of varying thickness, making the pruner versatile across a range of gardening applications. The easy blade replacement mechanism ensures that users can maintain their tool without hassle, providing convenience and long-term performance.

Safety is a paramount consideration in the design of the Mantis Pruner E System. It features an automatic shut-off function that activates whenever the pruner is not in use, reducing the risk of accidental injuries. Additionally, the pruner is equipped with a safety grip that prevents slippage during operation, giving users confidence while they work.

Battery life is another critical aspect of this system. The Mantis Pruner E System is equipped with a long-lasting lithium-ion battery that provides extended runtime. This allows for long gardening sessions without interruptions for recharging. The battery can be conveniently charged using a standard outlet, further enhancing the tool's usability.

In terms of technological integration, the Mantis Pruner E System includes an intuitive control panel that displays battery status and operational readiness. Users can easily monitor their tool’s performance, ensuring they are always ready for the task at hand.

Overall, the Mantis Pruner E System stands out for its blend of power, efficiency, safety, and user-centric design. Its thoughtful features cater to the needs of modern gardeners, ensuring a seamless pruning experience that saves time and energy while delivering exceptional results. Whether trimming hedges or shaping shrubs, the Mantis Pruner E System proves to be an indispensable tool in any gardening arsenal.