Adjusting saw chain tension

WARNING DANGER

IT IS VERY IMPORTANT TO MAINTAIN THE

PROPER CHAIN TENSION. RAPID WEAR OF THE GUIDE BAR OR THE CHAIN COMING OFF EASILY CAN BE CAUSED BY IMPROPER TENSION.

1.Loosen mounting nut and adjust the chain tension by turning the tensioner screw

2. Hold unit vertically, and tighten mounting nut

3.Move saw chain backwards on guide bar by hand. Saw chain should move freely on guide bar if it is in proper mesh with the sprocket. If saw chain is difficult to rotate or binds on guide bar, it is too tight. Re-adjust if necessary.

WARNING – DANGER

BE SURE UNIT IS UNPLUGGED BEFORE

MAKING ANY ADJUSTMENTS.

Lubricating the guide bar and chain

1.Power pruning mechanism is equipped with the automatic oiling system that can be adjusted in the field. The saw chain bar, and chain are lubricated when chain rotates. The pump is set at the factory to a minimum flow rate.

2.Remove oil fill cap and fill reservoir with a quality, low viscosity guide bar and saw chain oil. Tighten the cap securely.

WARNING DANGER

TO PREVENT PLASTIC DETERIORATION, DO NOT

USE SYNTHETIC OR SILICONE BASED OIL.

3.After starting the motor, run the chain at medium speed and check the saw chain. Very little visible oil on the saw chain will provide sufficient lubrication.

4.The oil tank will provide about 40 min. of cutting time (when set to a minimum flow rate). Refill the oil tank as needed.

5.A temporary increase in oil flow is recommended when cutting hardwood or wood showing a large amount of sap. This will speed oil consumption, and require more frequent oil tank refills.

6.To adjust oil pump to max, the control screw must be pressed in slightly prior to turning. Failure to do so could damage the pump or screw.

WARNING DANGER

THE OIL FLOW RATE ADJUSTING SCREW HAS 3

INCREMENTAL SETTINGS.

7.Wipe debris from around the oil fill cap prior to re-filling the oil reservoir.

WARNING DANGER

NEVER FILL THE OIL TANK OR ADJUST THE OIL

FLOW WHILE MOTOR IS RUNNING.

DISCONNECT POWER CORD FROM THE

POWER SOURCE FIRST.

Pruner E System specifications

The Mantis Pruner E System is an innovative gardening solution that redefines the way we maintain our gardens and landscapes. Designed for both amateur gardeners and professional landscapers, this advanced pruning system combines ergonomic design with cutting-edge technology to provide exceptional efficiency and ease of use.

One of the main features of the Mantis Pruner E System is its electric motor. This system operates quietly and efficiently, reducing the fatigue often associated with traditional manual pruning tools. The electric motor ensures precise cutting, allowing users to tackle even the most complicated pruning tasks without straining their hands or wrists. The lightweight design further enhances usability, enabling hours of comfortable operation.

The E System also incorporates a unique blade technology. Built from high-quality, hardened steel, these blades are engineered for durability and sharpness. They are designed to handle branches of varying thickness, making the pruner versatile across a range of gardening applications. The easy blade replacement mechanism ensures that users can maintain their tool without hassle, providing convenience and long-term performance.

Safety is a paramount consideration in the design of the Mantis Pruner E System. It features an automatic shut-off function that activates whenever the pruner is not in use, reducing the risk of accidental injuries. Additionally, the pruner is equipped with a safety grip that prevents slippage during operation, giving users confidence while they work.

Battery life is another critical aspect of this system. The Mantis Pruner E System is equipped with a long-lasting lithium-ion battery that provides extended runtime. This allows for long gardening sessions without interruptions for recharging. The battery can be conveniently charged using a standard outlet, further enhancing the tool's usability.

In terms of technological integration, the Mantis Pruner E System includes an intuitive control panel that displays battery status and operational readiness. Users can easily monitor their tool’s performance, ensuring they are always ready for the task at hand.

Overall, the Mantis Pruner E System stands out for its blend of power, efficiency, safety, and user-centric design. Its thoughtful features cater to the needs of modern gardeners, ensuring a seamless pruning experience that saves time and energy while delivering exceptional results. Whether trimming hedges or shaping shrubs, the Mantis Pruner E System proves to be an indispensable tool in any gardening arsenal.