Marantz MA6100 manual Audio Input jack

Page 5

NqPOWER switch

Press the button to turn power on (POWER ON mode), and press it again to turn power off (POWER OFF mode). When it is required to remote control the power mode of the MA6100, be sure to leave this switch in the POWER ON mode.

NwPOWER ON/STANDBY indicator

A POWER ON/ STANDBY indicator, the indicator glow red when the unit is in Standby mode and blue when the unit is On.

eAudio INPUT jack

Connect the preamplifier output to this jack.

rAudio INVERT OUTPUT jack

This jack is for output of signal which was inverted from the normal input signal.

tREMOTE CONT. IN jack

Connect with the remote control output jack of a component which is compatible with MARANTZ remote control system. The remote control allows to switch the power of the MA6100 between the “POWER ON” mode and “STANDBY” mode.

yREMOTE CONT. OUT jack

Connect with the remote control input jack of a component which is compatible with MARANTZ remote control system.

uEXT. CONT IN jack

Not connected when the power is to be controlled from a MARANTZ remote control unit.

Connect to the video signal output of a video component when the power is to be controlled based on a video signal.

The external control allows to switch the “POWER ON” and “STANDBY” modes of the unit according to the “presence” and “absence” of video signal.

When the video signal becomes absent while the power of the unit is on, it enters the “STANDBY” mode in about 4 seconds; the unit enters the “POWER ON” mode again when the video signal is input again.

As the control data of the EXT. CONT IN jack is also output at the REMOTE CONT. OUT jack, the MA6100 units connected after this unit can also be switched between the “POWER ON” and “STANDBY” modes.

Leave Power switch q in the ON position.

*External control using a signal from 5 to 13 V in place of video signal is also possible using this jack. However, as this scheme belongs to the professional use, please consult MARANTZ if you want to adopt such an external control scheme.

iSPEAKER SYSTEM terminals

Connect with speakers using speaker cords. Respect the + and - polarity when connecting speakers.

Use speakers with an impedance of 8 to 16 ohms.

oAC OUTLET

This receptacle supplies AC power regardless of the power switch setting.

The total power consumption of the equipment connected to this receptacle should not exceed 200 W.

If you want to connect the MA6100, you can connect only one unit here. Do not connect more than one MA6100 in series.

!0Power cord

Insert the plug at the extremity of the power cord into a 120 V AC household AC outlet.

To Enjoy sound with a higher quality, it is recommended to match the power connection polarity with other components. The white-lined wire of the power cord is the neutral (GND) wire.

ENGLISH

5

Image 5
Contents Model MA6100 User Guide Risk of Electric Shock Do not Open AC Polarized Plug Safety InstructionsNames and Functions FeaturesIntroduction Audio Input jack Connection for a 5-channel system ConnectionsTroubleshooting Care and MaintenanceSpecification Speaker ConnectionParticularites Nomet Role DES CommandesPrise audio Input Branchement pour un système à 5 voies RaccordementsEntretien Connexion DE HAUT-PARLEURReparations EN CAS DanomalieIs a registered trademark

MA6100 specifications

The Marantz MA6100 is a remarkable power amplifier that has gained a loyal following among audiophiles and music enthusiasts since its introduction. Renowned for its robust build quality and high-performance capabilities, the MA6100 exemplifies Marantz's commitment to delivering exceptional sound reproduction.

One of the standout features of the Marantz MA6100 is its powerful amplification. With an output of 70 watts per channel into 8 ohms, the amplifier is well-suited for driving a wide range of speakers, from compact bookshelf designs to larger floor-standing models. The MA6100 employs a high-current design, which allows it to deliver authoritative bass response and dynamic headroom, making it an excellent choice for a variety of music genres.

The design of the MA6100 is characterized by its classic Marantz aesthetic, featuring a sleek aluminum front panel and a minimalist layout. The amplifier is equipped with a dual-mono construction, which ensures that each channel operates independently. This design minimizes crosstalk and enhances stereo imaging, resulting in a more immersive listening experience.

Incorporating advanced technologies, the MA6100 features a custom-designed, high-efficiency power supply that delivers clean power even during demanding playback scenarios. Additionally, the amplifier utilizes discrete output devices along with high-quality capacitors and resistors to ensure low distortion and a wide frequency response. Its frequency range extends from 20 Hz to 20 kHz, providing faithful reproduction of both low and high frequencies.

Another notable characteristic of the Marantz MA6100 is its versatility. The amplifier includes multiple inputs, allowing users to connect various audio sources. Additionally, the MA6100 can be easily integrated into an existing audio system, making it suitable for both stereo and home theater setups.

The MA6100 also features a robust protection circuit that safeguards the amplifier and connected speakers from damage due to overload or short circuits. This reliability adds peace of mind for users who want to enjoy their music without worrying about equipment safety.

In summary, the Marantz MA6100 stands out as a high-performance power amplifier that combines power, precision, and versatility. It reflects Marantz's dedication to audio excellence, making it a cherished component for anyone looking to elevate their listening experience. With its impressive power output, premium build quality, and advanced technologies, the MA6100 is a timeless choice for both casual listeners and serious audiophiles alike.