Little Wonder 8271, 8221 manual Changing the direction of the Discharge Chute Figure #4

Page 8

Knobs previously installed.

E.Changing the direction of the Discharge Chute (Figure #4)

1.Loosen the Knobs (38524) by hand and, if needed, the Nuts (64229-03) with a 1/2” wrench.

2.Rotate the Discharge Chute to the desired position.

3.Retighten the Knobs by hand and the Nuts, if loosened, with the 1/2” wrench.

F.Attaching the Hose Assembly to the Inlet Assembly (Figure #5)

1.Loosen the knob and rotate the Flapper Retainer (720258.10) to allow the Inlet Flapper to be lifted upward.

2.With the Inlet Flapper held upward, install the Hose Assembly by inserting the flange of the Hose Flange Assembly into the space (gap) between the face of the Inlet Assembly Flange and the back face Flange Retainer Plate as shown. The pin located in the upper right corner of the Inlet Assembly Flange will prevent the Hose Flange Assembly from sliding out of

this pocket.

3.Since the Hose Assembly may be rotated 360 degrees, orient the Intake Nozzle to your preferred position and lock it in place.

4.To lock the Hose Assembly in place, tighten the two knobs attached to the Flange Retainer Plate and Flapper Retainer as shown. By tightening the knobs, it will push the flange of the Hose Flange Assembly against the flange of the Inlet Assembly and activate the Safety Switch Plate (720234.17). THIS MUST BE DONE TO OPERATE THIS UNIT.

5.When the Hose assembly is removed from the Inlet Assembly for unit transportation, the Inlet Flapper must be closed and the Flapper Retainer (720258.10) must be rotated to lock it in place.

INLET

PIN

FLAPPER

INLET

ASSEMBLY

HOSE

FLANGE

ASSEMBLY

FLAPPER

HOSERETAINER

ASSEMBLY

FLANGE KNOB

RETAINER PLATE

Figure #5

7

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Little Wonder Shredding Table of Contents Safety and Warnings General Safety Rules Wear gloves to protect your handsEngine/ Fuel Warnings Don’ts Engine/ Fuel Warnings Do’sMounting the Shredding TruckLoader Frame Figure #2 Assembly InstructionsHose Assembly Figure #1 Figure #3 Attaching the Hose Assembly to the Inlet Assembly Figure #5 Changing the direction of the Discharge Chute Figure #4Filling the Gas Tank Connecting the BatteryAdding Oil to the Engine Operation Engine Oil and Fuel TransportationRe-filling the Gas Tank Preparing the TruckLoader Unit for TransportationMaintenance Schedule Frequency Maintenance RequiredMaintenance Removing and Replacing the Fan and Talon Ring Figure #7Liner Replacement Figure #7 Oil and Filter ChangeHeavy-Duty Air Cleaner Spark PlugPreparing for Long-Term Two Months or More Storage StorageIntake Hose and Discharge View Base Unit View Model #8221 & 8271 Part Numbers Painted Transition Discharge TubeFlapper Retainer For Shredding TruckLoader Year limited Service & Warranty policyPhone 877-596-6337 FAX

8221, 8271 specifications

Little Wonder 8271 and 8221 are powerful outdoor equipment designed to streamline yard maintenance and landscaping tasks. Both models are engineered with durability and efficiency in mind, appealing to both homeowners and professional landscapers.

The Little Wonder 8271 is equipped with a robust 8.5 HP engine, ensuring ample power for severe conditions. An impressive feature is its large capacity debris collection bag that minimizes downtime by allowing for extended operation before needing to be emptied. The 8271 utilizes a unique shredding system that efficiently reduces the size of debris, making disposal simple and effective. Its easy maneuverability is aided by thick rubber tires, providing traction on various terrains.

Complementing the 8271, the Little Wonder 8221 model comes with a slightly less powerful but equally efficient 6.5 HP engine. This model is ideal for homeowners or smaller jobs that don't require as much power but still demand performance. The 8221 also features a user-friendly design, with accessible controls that allow for intuitive operation. Its collection bag is designed for quick and easy removal, enhancing user experience and efficiency.

Both models incorporate advanced airflow technology that enhances suction power, allowing them to pick up a variety of debris including leaves, grass clippings, and even small sticks. This technology plays a crucial role in their effectiveness, especially during the fall season when leaf cleanup can be a tedious task. The durable construction of these machines ensures they can withstand the rigors of outdoor work, with high-quality materials used in both the frame and engine components.

Safety features are also a priority in the design of the Little Wonder 8271 and 8221. Equipped with protection guards and emergency shut-off switches, users can operate with peace of mind. The ergonomic handles reduce strain during use and are adjustable to accommodate different user heights.

In summary, Little Wonder 8271 and 8221 are dependable options for anyone looking to enhance their yard maintenance capabilities. Between their powerful engines, advanced debris handling technologies, and user-friendly designs, these models stand out in the landscaping equipment market. Whether tackling large landscaping projects or simple yard work, both machines provide exceptional results and reliability.
Top Page Image Contents