Marantz PM8004 Advanced operations, Connecting pre out connectors, Setting Auto standby mode

Page 13

ENGLISH

Connecting pre out connectors

If you use a power amplifier, connect it as shown below, and then you can use this unit as a preamplifier.

For connecting speaker systems, refer to the instruction manual supplied with the power amplifier to be used.

Power-amplifier

Connecting the remote control connectors

When you use this unit connected to Marantz audio components, it sends control signals to operate each component.

nnConnection

Use the remote connection cable (supplied with a Marantz audio component you want to connect) to connect the REMOTE CONTROL OUT terminal of this unit to the REMOTE CONTROL IN terminal of the component to be connected.

Advanced operations

Setting Auto standby mode

With the Auto standby mode ON, this unit will automatically enter the Auto standby mode after about 30 continuous minutes of no output from the speakers or headphones.

SOURCE DIRECT

L R To input

connectors

L

R

NOTE

NEVER insert the short-circuiting pin plug into the PRE OUT terminals. Doing so could result in damage.

Signals are output from the PRE OUT terminals even when using headphones.

nnSetting

Set the remote control switch located on the rear panel of the connected audio component to “EXTERNAL” or “EXT.” to use this feature.

This setting will disable remote sensor reception of the connected audio component.

To operate the connected audio component, point the remote control at the remote sensor of this unit.

INPUT

OUTPUT

IN OUT

 

REMOTE CONTROL

RC OUT

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CD player

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Option unit

 

 

(such as remote control receiver unit)

Press and hold <SOURCE DIRECT> for at least 5 seconds.

• Auto standby mode is switched between On and Off.

Auto standby mode “Off”

 

Auto standby mode “On”

Power indicator

 

Power indicator

 

Flashes once

 

Flashes three times

NOTE

Perform the operation using the buttons on the unit. You cannot perform the operation using [SOURCE DIRECT] on the remote control.

The default setting for the Auto standby mode is OFF.

This unit will automatically enter Auto standby mode after about continuous 30 minutes in the following conditions.

No output from the selected input source.

No operation performed on the remote control.

No operation of <SPEAKERS A/B>, <POWER AMP DIRECT>, <SOURCE DIRECT> or <INPUT SELECTOR>.

10

Image 13
Contents PM8004 Mark HotFor Canadian customers Avertissements Advertencias Getting started AccessoriesAbout this manual Tri-tone control Main featuresOperating range of the remote control About the remote controlInserting the batteries Front panel Rear panel Part names and functionsQ5 Q4 Q3Q2 Q1Q0o Q2Q1Q0o NnCD operation Remote controlNnDVD operation NnTuner operationConnecting the speakers Connecting the audio equipmentBasic connections PreparationsConnecting recorders Connecting playersSpeaker connections NnSpeaker impedanceBasic operation Connecting the power cordBefore use Connecting P.DIRECT connectors Using headphone setAdvanced connections Starting playbackSetting Auto standby mode Connecting pre out connectorsNnSetting Advanced operationsSymptom Cause Countermeasure TroubleshootingExplanation terms SpecificationsIndex 17 3/8 11/16 PM8004 unit inchs mm17.5 12 15/16 14 15/16

PM8004, 541110491028M specifications

The Marantz PM8004 is a powerful integrated amplifier designed for audiophiles who value both sound quality and aesthetic appeal. As part of the Marantz lineup, the PM8004 inherits the brand's long-standing tradition of delivering high-fidelity audio reproduction, combining advanced technologies with elegant design.

One of the standout features of the PM8004 is its robust build quality. The amplifier sports a solid chassis that reduces the impact of vibrations, ensuring that sound performance is not compromised. The high-current discrete power output stage, featuring a high-speed power supply, helps drive demanding speakers effortlessly, delivering rich and dynamic sound across various frequencies.

The PM8004 boasts an impressive 70 watts per channel output, making it suitable for a wide range of speakers, whether you are building a compact setup or a larger home theater system. Its Class A/B amplifier design offers the best of both worlds, providing the warmth and detail typically associated with Class A amplifiers while maintaining the efficiency of Class B, which is crucial for extended listening sessions without overheating.

For connectivity, the PM8004 is versatile, featuring six line-level inputs, including a dedicated phono input for vinyl enthusiasts, which supports both moving magnet and moving coil cartridges. This allows for seamless integration of various sources, including CD players, turntables, and streaming devices. The gold-plated RCA connectors ensure solid signal transfer and durability.

The amplifier also incorporates advanced audio technologies like Marantz's proprietary HDAM (Hyper Dynamic Amplifier Module) technology, which enhances dynamic range and lowers noise levels, resulting in clearer and more detailed audio playback. Additionally, the PM8004 includes tone control features, allowing users to tailor the sound to their personal preferences.

The aesthetic of the PM8004 is equally noteworthy, showcasing a sleek, retro-inspired design with a brushed aluminum front panel and elegant controls. The classic look is complemented by high-quality knobs and switches that add to the overall user experience.

In summary, the Marantz PM8004 integrated amplifier combines exceptional sound quality, robust performance, and elegant design. With its powerful output, flexible connectivity options, and advanced technologies, it is an excellent choice for anyone seeking to enhance their audio experience. Whether you're a dedicated audiophile or simply someone who loves great music, the PM8004 is built to deliver an extraordinary listening experience.