Lawn-Boy 10356, 10357, 10358 manual Storage, Cleaning the Mower, Folding the Handle

Page 15

15

Cleaning the Mower

1.Remove the bag (model 10358 only).

2.With the engine

running on a flat paved surface, spray a stream of water in front of the right rear wheel.

1093

The water will splash into the path of the blade, cleaning out the clippings.

3.When no more clippings come out, stop the water and move the mower to a dry area.

Storage

Store the mower in a cool, clean, dry place.

Folding the Handle

Warning

Folding or unfolding the handle improperly can damage the cables, causing an unsafe operating condition.

￿Do not damage the cables when folding or unfolding the handle.

￿If a cable is damaged, contact an Authorized Service Dealer.

1.Loosen the handle

knobs until you can move the upper handle freely.

m-6586

Preparing the Mower for Storage

Warning

Gasoline vapors can explode.

￿Do not store gasoline more than 30 days.

￿Do not store the mower in an enclosure near an open flame.

￿Allow the engine to cool before storing it.

1.On the last refueling of the year, add fuel stabilizer to the fuel as directed by the engine manufacturer.

2.Run the mower until the engine stops from running out of fuel.

3.Prime the engine and start it again.

4.Allow the engine to run until it stops. When you can no longer start the engine, it is sufficiently dry.

5.Remove the wire from the spark plug and connect the wire onto the retaining post.

6.Remove the spark plug, add 1 oz. (30 ml) of oil through the spark plug hole, and pull the starter rope slowly several times to distribute oil throughout the cylinder to prevent cylinder corrosion during the off-season.

7.Loosely install the spark plug.

8.Tighten all nuts, bolts, and screws.

9.Charge the battery for 72 hours, then unplug the battery charger and store the mower in an unheated area. If you must store the mower in a heated area, you must charge the battery every 90 days.

2.Fold the upper handle forward as shown.

Important: Route the cables to the outside of the handle knobs as you fold the upper handle.

m-6585

m-6585

3.To unfold the handle, reverse the steps above.

Removing the Mower from Storage

1.Remove the spark plug and spin the engine rapidly using the starter to blow the excess oil from the cylinder.

2.Install the spark plug and tighten it with a torque wrench to 15 ft-lb (20 N￿m).

3.Charge the battery (model 10357 only).

4.Connect the wire to the spark plug.

3329-170

Page 14 Page 16
Image 15
Page 14 Page 16
Contents General Operation SafetyIntroduction Silver SeriesService ChildrenSlope Operation Safety/Instruction Decals Product Overview Unfolding the Handle SetupInstalling the Fuse Filling the Engine with OilChecking the Engine Oil Level Charging the BatteryBefore Operating Filling the Fuel TankAdjusting the Handle Height Adjusting the Cutting HeightStopping the Engine Using the Self-propel DriveOperation Starting the EngineInstalling the Mulch Plate Installing/Removing the Rear Grass Bag Installing the Cover PlateCutting Grass Operating TipsRecommended Maintenance Schedule MaintenancePreparing for Maintenance Changing the Engine OilReplacing the Air Filter Replacing the Blade Replacing the FuseLubricating the Self-propel Drive Preparing the Mower for Storage Cleaning the MowerStorage Folding the HandleLawn-Boy No-Worry Warranty

10356, 10357, 10358 specifications

The Lawn-Boy 10356, 10357, and 10358 models are part of Lawn-Boy's impressive line of high-performance lawn mowers designed to ensure ease of use and exceptional cutting efficiency. Each model boasts a range of features and technologies tailored to meet the needs of homeowners who seek a reliable, efficient solution for maintaining their lawns.

Starting with the Lawn-Boy 10356, this mower is propelled by a powerful 149cc Kohler engine known for its dependability and energy efficiency. The 10356 is equipped with a 21-inch steel cutting deck that offers durability and a wide cutting path, allowing users to cover more ground in less time. One standout feature is Lawn-Boy's innovative TriAction cutting system, which ensures a finer cut for a healthier lawn by using a combination of a specialized blade, superior airflow, and a unique deck design. This model also comes with a quick-release handle that makes it easy to adjust the cutting height to one of the six pre-set positions, accommodating various grass types and personal preferences.

Similarly, the Lawn-Boy 10357 model showcases many of the same features but adds the advantage of self-propulsion, making it easier for users to maneuver across their lawns, regardless of terrain. The variable speed drive system allows operators to select their preferred speed, providing them with more control while mowing. The 10357 also includes a side discharge option for those who prefer to leave clippings on the lawn, as well as a rear bagging capability that simplifies cleanup.

Finally, the Lawn-Boy 10358 takes efficiency a step further with its innovative electric start feature. This model enables users to start their mower with a simple push of a button, eliminating the hassle of pull cords. Like its counterparts, the 10358 is designed for comfort and convenience, with ergonomic handles that reduce strain during mowing. This model also incorporates the same durable steel deck and TriAction system, ensuring superior cutting performance while maintaining the signature Lawn-Boy quality.

Collectively, the Lawn-Boy 10356, 10357, and 10358 are exemplary choices for both novice and experienced lawn care enthusiasts. With their robust engines, versatile cutting systems, and user-friendly designs, these mowers epitomize reliability and efficiency in lawn maintenance, making them valuable investments for any homeowner devoted to keeping their lawns pristine.
Top Page Image Contents