Land Pride SP3084, SP3072, SP2072 Tractor Requirements, Dealer Preparations, Assembly Instructions

Page 8

Table of Contents

Section 1: Assembly & Set-Up

Tractor Requirements

Tractor horsepower and hitch category should be within the range noted below. Tractors outside the horsepower range must not be used.

•SP20 Tractor Horsepower Rating25-35 HP

•SP30 Tractor Horsepower Rating 30-50 HP

•SP20 & SP30 Hitch CategoryCat. I

NOTE: Front tractor weights and/or ballast to tires may be required to offset weight of unit. Consult your tractor manual for details to install ballast weights.

Dealer Preparations

!CAUTION!

Never allow anyone under unit while unloading.

Using a lifting device of adequate size to remove crate from flat bed. Place on a smooth flat work surface and uncrate unit. This unit is shipped partially assembled. It is the dealership’s responsibility to finish assembly of the unit. This section covers the proper way for the Land Pride dealer to assembly the pulverizer.

Assembly Instructions

Review all safety instructions printed in this manual before assembling the pulverizer.

NOTE: Do not tighten hardware until assembly is complete.

2.Insert spacer (#4) between upper hitch plates. Install 3/4"-10 x 4" GR5 cap screw (#6), lockwasher (#8), and hex nut (#7).

3.Insert lower 3-point hitch pins (#9) into clevis lugs. Secure hitch pins with linch pins (#9).

4.Tighten all Hardware to the proper torque values.

30156

Hitch Assembly

Figure 1-1

Torque Requirements

Refer to “Torque Values Chart” on page 14 to determine correct torque values when tightening hardware.

SP20 Hitch Assembly

Refer to Figure 1-1:

1.Install upper hitch plates (#1 & #2) inside mounting bracket plates with 3/4"-10 x 2" GR5 cap

screws (#4), lockwashers (#8), and hex nuts (#6).

2.Insert spacer (#3) between upper hitch plates, install 3/4"-10 x 4" GR5 cap screw (#5), lockwashers (#8), and hex nut (#6).

3.Make sure 3/4" hex jam nuts (#10) is screwed fully onto lower hitch pins (#11).

4.Install lower 3-point hitch pins (#11) to the pulverizer frame with 7/8" lock washers (#9) and hex nuts (#7).

5.Tighten all Hardware to the proper torque values.

Hitch Assembly

Refer to Figure 1-2:

1.Install upper hitch plates (#2 & #3) inside mounting brackets with 3/4"-10 x 2" GR5 cap screws (#5), lockwashers (#8), and hex nuts (#7).

30157

Hitch Assembly

Figure 1-2

6

SP2060, SP2072, SP3072 & SP3084 Soil Pulverizers 307-099M

7/11/12

Page 7 Page 9
Image 8
Page 7 Page 9
Contents SP20 Series SP30 SeriesTable of Contents Important Safety Information Be Aware Signal WordsFor Your Protection Shutdown and StorageKeep Riders Off Machinery Practice Safe MaintenanceTransport Machinery Safely Wear Protective Equipment Avoid High Pressure Fluids HazardSafety Labels 818-719CUsing This Manual ApplicationOwner Assistance IntroductionAssembly Instructions SP20 Hitch AssemblyHitch Assembly Tractor RequirementsOperating Checklist Operator’s ResponsibilitiesTractor Hook-Up OperatingTransporting Adding WeightGeneral Operating Instructions Adjustments ShanksMaintenance Maintenance & LubricationLong Term Storage Lubrication PointsSP2060 SP2072 SP3072 SP3084 Specifications & CapacitiesSP2060, SP2072, SP3072 & SP3084 SP20 & SP30 Series Soil Pulverizers Features & BenefitsFeatures Benefits Troubleshooting Problem SolutionBouncing Shanks bending sideways Bending frame and or shanksIn-tpi Ft-lb Mm x pitch Torque Values Chart for Common Bolt SizesTorque Values Chart Warranty WarrantySpikes and roller studs Considered wear items Model Number Serial NumberCorporate Office P.O. Box Salina, Kansas 67402-5060 USA

SP2060, SP2072, SP3072, SP3084 specifications

The Land Pride SP3084, SP3072, SP2072, and SP2060 models represent a line of superior grading scrapers designed for versatility and performance in a variety of terrain and applications. These implements are ideal for grading, leveling, and other landscaping tasks, featuring advanced technologies and innovative design to enhance ease of use and efficiency.

Starting with the SP3084, this model features a robust 84-inch working width, making it suitable for larger projects. The SP3084 is equipped with a heavy-duty frame that provides durability and stability during operation. Its unique hydraulic design allows for precise control of the blade angle and depth, enabling operators to achieve desired grading results with ease. Additionally, the SP3084 features adjustable side wings that can extend the working width for more extensive coverage, ensuring optimal performance across various tasks.

The SP3072, with its 72-inch width, offers similar advantages in a more compact design. This model is particularly suited for smaller tractors and tighter spaces, allowing for effective operation without compromising on power. The SP3072 incorporates a quick-attach system, facilitating easy attachment and detachment from the tractor. Operators will appreciate the hydraulic control features that provide on-the-fly adjustments, promoting efficiency during grading tasks.

The SP2072 and SP2060 models cater to operators looking for outstanding performance in smaller grading operations. The SP2072, also 72 inches wide, combines a lightweight design with heavy-duty components, making it versatile for various applications, including driveway maintenance and landscaping. The SP2060, with its 60-inch working width, is perfect for smaller compact tractors and provides an efficient solution for tasks that require precision in limited spaces.

All models are built with high-quality materials to ensure longevity and reliability. The intuitive designs minimize operator fatigue and maximize efficiency, making them essential tools for agricultural and construction tasks alike. With exceptional maneuverability, ease of operation, and advanced hydraulic technology, Land Pride's lineup of grading scrapers ensures that users can achieve superior results on every project. Each model meets rigorous industry standards, making them a trusted choice for landscaping professionals and agricultural operators across various applications.
Top Page Image Contents