Onkyo TX-8050 Firmware Update, En-43, Advanced Setup-Continued, Version, Receiver via NET

Advanced Setup—Continued

If you’ve made a change to any item, the display will indicate “SAVE [ENTER]: [SELECT]” when you exit Network Setup. If you want to apply the changes you made, press [ENTER]. If you want to re-do the setup, press [RETURN] to re-do the procedure from the beginning.

Note:

When the “Network Control” setting is set to “Disable”, this setting cannot be selected.

6. Firmware Update

See “Firmware Update” for the update procedure.

Notes:

•The setup menu display will become available several tens of seconds after the receiver has started up.

•Perform the firmware update only when such an announcement is posted on the Onkyo web site. Visit the Onkyo web site for the latest information.

•It takes about 5 minutes to complete the firmware update.

Version

Displays the current version of the firmware.

Receiver

via NET:

Performs the firmware update via Internet. Check the network connection before updating.

via USB:

Performs the firmware update from a USB device. These settings allow you to update the receiver’s firmware. Do not shutdown the power of the receiver while updating.

Universal Port

via NET:

Performs the firmware update via Internet. Check the network connection before updating.

via USB:

Performs the firmware update from a USB device. You can update the Onkyo dock’s firmware. Do not shutdown the power of the receiver while update.

Note:

This update must not be performed if no dock is connected to the UNIVERSAL PORT jack.

En-43