Onkyo TX-8050 Adjusting the Volume of Zone, Muting Zone, Checking the Source Selected for Zone

Zone 2—Continued

3	To turn off Zone 2, press the [ZONE 2] button,
	followed by the [] button.

Adjusting the Volume of Zone 2

Press the receiver’s [ZONE 2] button, and then use the [VOLUME] control, or remote controller’s [ZONE 2] button, and then use the VOLUME []/[] buttons.

Muting Zone 2

ZONE 2

MUTING

On the remote controller, press the [ZONE 2] button, and then press the [MUTING] button.

To unmute Zone 2, press the remote controller’s [ZONE 2] button, and then press the [MUTING] button again.

Notes:

•Zone 2 can also be unmuted by adjusting the volume.

•The Zone 2 level, balance, and tone functions have no effect on the ZONE 2 PRE OUT when the Zone 2 Out setting is set to Fixed ( page 42).

•To control the volume and mute of the receiver in the main room, press the remote controller's [MAIN] button and then perform the desired operation.

Checking the Source Selected for Zone 2

Press the [ZONE 2] button on the receiver itself.

The display will show the name of the selected source.

En-46