Listening to the Radio
|
| / |
| TUNING / |
|
|
| Number |
|
| buttons |
INPUT | TUNING MODE | D.TUN |
Listening to AM/FM Stations
With the
1 Use the receiver’s [INPUT] selector, or the
remote controller’s INPUT SELECTOR buttons to select AM or FM.
In this example, FM has been selected.
Band Frequency
(Actual display depends on the country.)
2 Press the [TUNING MODE] button so that the AUTO indicator appears or disappears from the display.
AUTO indicator
Auto Tuning
To activate this mode, press the [TUNING MODE] button to turn on the “AUTO” indicator. In this mode, you will receive the broadcast in stereo sound.
Manual Tuning
To activate this mode, press the [TUNING MODE] button to turn off the “AUTO” indicator. In this mode, you will receive the broadcast in monaural sound.
3 Press the TUNING [] or [] button.
You can also use the remote controller’s arrow []/[] buttons to tune the radio.
Auto Tuning
Searching stops when a station is found.
Manual Tuning
The frequency stops changing when you release the button.
Press the buttons repeatedly to change the frequency one step at a time.
The frequency changes in 0.05 MHz steps (or 0.05 MHz to 0.2 MHz for North American model) for FM, and
9 kHz (or 10 kHz) steps for AM.
When tuned to a station, the TUNED indicator appears. When tuned to a stereo FM station, the FM STEREO indicator also appears.
TUNED | FM STEREO | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Tuning to Weak FM Stereo Stations
If the signal from a stereo FM station is weak, it may be impossible to get good reception. In this case, switch to Manual Tuning mode and listen to the station in mono.
