Enjoying Audio Sources
INPUT
SELECTOR
SPEAKERS A, B | VOLUME |
PHONES | INPUT |
1 Rotate the receiver’s [INPUT] selector, or press the remote controller’s INPUT SELECTOR buttons to select the source you want to hear.
2 Use the [SPEAKERS A] and [SPEAKERS B] buttons on the receiver to select the speaker set that you want to use.
The A and B speaker indicators show whether each speaker set is on or off.
A,B Indicators
VOLUME /
MUTING
Muting the Receiver (remote controller only)
You can temporarily mute the output of the receiver.
Press the remote controller’s [MUTING] button.
The receiver is muted.
To unmute the receiver, press the [MUTING] button again.
Note:
The Mute function will be cancelled if the remote controller’s [VOLUME] buttons are pressed or the receiver is set to Standby.
3 Start playback on the selected component.
4 To adjust the volume, use the receiver’s [VOLUME] control, or the remote controller’s VOLUME []/[] buttons.
Turn the control clockwise to turn up the volume or counterclockwise to turn down the volume.
Using Headphones
You can connect a pair of stereo headphones
Notes:
•Always turn down the volume before connecting your headphones.
•While the headphones plug is inserted in the PHONES jack, the speakers are turned off.
•If you connect an iPod or iPhone to the USB port on this device, no sound will be output from the headphones jack.