Listening to the
■Selecting Presets
To select a preset, use the number buttons on the remote controller, the remote controller’s CH/ALBUM
■Deleting Presets
1 Select the preset that you want to delete.
See the previous section.
2 While holding down the [MEMORY] button, press the [TUNING MODE] button.
The preset is deleted and its number disappears from the display.
■Name Edit
You can enter a custom name for radio preset for easy identification. When entered, the custom name will appear on the display.
The custom name is edited using the character input screen.
1 Press the [SETUP] button on the remote controller.
2 Use the arrow []/[] button to select “2. Souce Setup,” and then press [ENTER].
3 Use the arrow []/[] button to select “Name Edit,” and then press [ENTER].
4 Use the arrow []/[]/[]/[] button to select a character, and then press [ENTER].
Repeat this step to enter up to 10 characters.
5 When you’ve finished editing the name and want to store it, be sure to use the arrow []/[]/[]/[] button to select “OK” and then press [ENTER]. If you fail to do this, the name won’t be saved.
Shift*1:
Switches the displayed character.
(Left)/(Right):
Select these to move the cursor within the Name input area.
Space:
Enters a space character.
Back Space*2:
“Back Space” moves the cursor backward one character space. In addition, “Back Space” deletes the character to the left of the cursor.
OK:
Specifies that the entry is complete.
Tips:
*1 You can also perform this on the remote controller by using >10.
*2 By pressing [CLR] on the remote controller, you can delete all characters in the input.
Notes:
•This procedure can also be performed on the receiver by using [SETUP], TUNING []/[], PRESET []/ [], and ENTER.
•Press [RETURN] to return to the previous menu.
■Switching the Display
When receiving AM or FM, you can press the remote controller’s [DISPLAY] button to switch the display between the name you specified in Name Edit and the frequency that’s being received.
