- 21 -

TV Function
The auto memory will take a few minutes. The unit will search channels from the
lowest channel to the highest channel in the standard channel list. When tuning
operations are complete, the unit will exit and store the channels by sequence in the
memory.
During tuning, press the button to exit the auto memory.
Use the / (CH+/CH-) buttons to select the desired channel from those in memory.
Timer Setup
Press the SET to enter Timer setup menu, the screen will display as below:
Use the / (CH+/CH-) buttons to select the item you want to set.
Use the / (VOL+/VOL-) buttons to enter the item and to select.
Press the SET button again to exit from the setup menu.
Timer
Use the / (VOL+/VOL-) buttons to select ON or OFF. This function allows you to
set the start time and end time of the desired signal source. No matter what mode the
unit is in, this function will automatically start the playback of desired signal source.
Select ON to activate this function; select OFF to disable the function.
TIMER SET
TIMER
POWER ON
POWER OFF
SIGNAL
CHANNEL
OFF
_ _: _ _ am
_ _: _ _ am
TV
001
EXIT: SET
SEARCHING
EXIT
CH: 001
089.75MHz
Fine Tuning
Use the / (CH+/CH-) buttons to select Fine Tuning, and then press the
/ (VOL+/VOL-) button to tune forward or backward from the current channel.
Auto Memory
Use the / (CH+/CH-) buttons to select Auto Memory, press the OK or button to
enter auto memory mode: