- 22 -TV Function
Power on
To set the playback start time of the signal source, use the number buttons to input the
desired start time in sequence of hour, minute. Press the / (VOL+/VOL-) buttons
to shift between am and pm.
Power off
To set the playback end time of the signal source, use the number buttons to input the
desired time in sequence of hour, minute. Press the / (VOL+/VOL-) buttons to
shift between am and pm. when the playback of the signal source is over, the player
will enter standby mode.
Signal
Use the / (VOL+/VOL-) buttons to select TV, FM or AM.
Channel
Use number buttons to input the desired TV channel.
NOTE:
The function is active as long as the unit is continuously supplied with power. The unit
will automatically play the selected input signal at the set start time and enter standby
mode at the set end time each day.