JBL TiK Sub owner manual Troubleshooting, Technical Specifications

Models: TiK Sub

1 14
Download 14 pages 57.8 Kb
Page 5
Image 5
TROUBLESHOOTING

ENGLISH

TROUBLESHOOTING

If you are using the Speaker In connections and there is no sound from any of the speakers, check the following:

Receiver/amplifier is on and a source is playing.

The subwoofer is plugged in to an active AC outlet and turned on.

Check all wires and connections between receiver/amplifier and speakers. Make sure all wires are connected. Make sure none of the speaker wires are frayed, cut or punctured.

Review proper operation of your receiver/amplifier.

If there is low bass output, check the following:

Make sure the connections to left and right Speaker In have the correct polarity (+and –).

Make sure that the subwoofer is plugged into an active AC outlet and turned on.

Select the phase switch setting which provides maximum bass output at the listening position.

Adjust the crossover point.

Adjust the Contour control.

Turn up the bass with the Level control.

TECHNICAL SPECIFICATIONS

TiK Sub

Amplifier Power (RMS): 600 Watts

Driver: 15" Kevlar/Kapoc impregnated cellulose pulp cone

Inputs: Line Level, Speaker Level and DSP Direct

Outputs: Line Level and Speaker Level

Low Pass Frequency: 30 kHz – 150 Hz, 24 dB/octave, continuously variable

Dimensions (HxWxD): 570 x 440* x 550 cm

Weight: 61 kg.

* The front panel is 440 mm wide. The rear panel is 330 mm wide.

If you used the Line In connections and there is no sound from the subwoofer, check the following:

Receiver/amplifier is on and a source is playing.

The subwoofer is plugged in and turned on.

Check all wires and connections between receiver/amplifier and subwoofer. Make sure all wires are connected. Make sure none of the wires are frayed, cut or punctured.

Review proper operation of your receiver/amplifier.

If you hear high levels of midrange frequencies from the subwoofer in addition to bass, check the following:

Make certain that Filter Defeat is not pressed.

Try a lower crossover frequency using the Filter control.

Declaration of Conformity

We,, HarmanJBL EuropeConsumerA/S International

2, de Tours

KongevRoutejen 194B

DK-3460 Birkerød

72500 Château-du-Loir

DENMARK

FRANCE

declare in own responsibility, that the products described in this owner's manual are in compliance with technical standards:

EN 55 013/6.1990

EN 55013/A12: 1994

EN 55020:/6199488.

EN 61000-3-2: 1995

EN 55 022/6.1993

EN 60 065/1994

EN 60 555-2-3/1987/88

Steen Michaelsen

Steen Michaelsen

JBL Europe A/S

JBL Europe A/S

Harman Consumer International

Birkerød. DENMARK. 1/97

France 11/00

Page 5
Image 5
JBL TiK Sub owner manual Troubleshooting, Technical Specifications, If there is low bass output, check the following