Land Pride RCM45180, RC45180 manual Important Safety Information

The SAFETY ALERT SYMBOL indicates that there is a potential hazard to personal safety involved and extra safety precautions must be taken. When you see this sym- bol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment; haz- ard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in the operation, transport, mainte- nance and storage of equipment.

Land Pride

Important Safety Information

Table of Contents

Important Safety Information

For your safety and to develop a better understanding of your equipment, thoroughly read the Operator’s Sections of this manual before operation.

Safety Notations !

!CAUTION!

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices

Safety Rules

These rules and instructions

must be reviewed at least annually

by all operators!

					Most accidents are the result of negligence and careless-
Watch for the following Safety Notations throughout					ness, usually caused by failure of the operator to follow
					safety precautions. The following precautions are manda-
your Operator’s Manual:
					tory to prevent such accidents. Your implement has been
!
					designed with built-in safety features.
		DANGER!		Make sure everyone that uses this machine has read the
Indicates an imminently			hazardous situation which, if not		Operator’s Manual and understands how to operate it
avoided, will result in death or serious injury. This signal					safely.
word is limited to the most extreme situations.					This Operator’s Manual is considered a part of the imple-
!				!ment and should remain so when loaned or sold.
	WARNING!

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

7/14/08 RC45180 & RCM45180 Rotary Cutter 312-382M 1