Land Pride
Introduction
Table of Contents
Introduction
Using This Manual
This Operator’s Section is designed to help familiarize you with safety, assembly, operation, adjustments, trouble- shooting, and maintenance. Read this manual and follow the recommendations to help ensure safe and efficient operation.
The warranty sheet should be filled out by the owner and dealer at the time of purchase. After completion give the dealer the white copy and send the pink copy to Great Plains. Keep your copy in the manual for use when corre- sponding with the dealer.
To order a new Operator or Parts Manual contact your au- thorized dealer or write to the address listed below in the "Owner Assistance" paragraph. Include the model and se- rial numbers of your unit.
The information contained within this manual was current at the time of printing. Some parts may change slightly to assure you of the best performance.
Terminology:
"Right " or "Left" as used in this manual is determined by facing the direction the machine will travel while in use un- less otherwise stated.
Definitions:
NOTE: A special point of information related to it’s preceding topic. The author’s intention is that you read and note this information before continuing.
IMPORTANT: Information, related to it’s proceeding topic, that the author feels would be of use.
Owner Assistance
If customer service or repair parts are required contact your local Land Pride Dealer. He has trained personnel, repair parts, and the equipment needed to service your implement.
These parts have been specially designed and should only be replaced with genuine Land Pride parts.
Serial Number Plate
Refer to the following illustration for the location of your se- rial number plate.
14183
Serial Number Plate Location
Figure 1
For prompt service always use the serial number and model number when ordering parts from your Land Pride Dealer. Be sure to include your serial and model numbers in corre- spondence also.
Your dealer wants you to be satisfied with your new ma- chine. If for any reason you are not satisfied with the ser- vice received, the following actions are suggested:
1.Discuss the matter with your dealership Service Man- ager make sure he is aware of any problems you may have and that he has had the opportunity to assist you.
2.If you are still not satisfied, seek out the Owner or General Manager of the dealership, explain the prob- lem and request assistance.
3.For further assistance write to:
Customer Service
Great Plains Mfg. Inc.
P.O. Box 245
Assaria, Ks. 67416
7/14/08 | RC45180 & RCM45180 Rotary Cutter | 7 |