Krell Industries MS 6760 Setting Bios Function EPP Mode Select, ECP Mode Use DMA, LCD&TV Select

Setting BIOS Function

EPP Mode Select

The onboard parallel port is EPP Spec. compliant, so after the user chooses the onboard parallel port with the EPP function, the following message will be dis- played on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec or EPP

1.9spec can be chosen.

ECP Mode Use DMA

The ECP mode has to use the DMA channel, so choose the onboard parallel port with the ECP feature. After selecting it, the following message will appear: “ECP Mode Use DMA.” At this time, the user can choose between DMA channel

3or 1.

Init Display First

This item specifies which VGA card is your primary graphics adapter. Settings: PCI Slot and AGP.

System Share Memory Size

For SiS650 chipset, the system shares memory to the onboard VGA card. This setting controls the exact memory size shared to the VGA card. Setting options: 4MB, 8MB, 16MB, 32MB, 64MB, 24MB.

SiS301 Display Type

This item allows you to set the TV display type. Setting options: CRT1+S-V PAL OTV, CRT1+S-V PAL UTV, CRT1+S-V NTSC OTV, CRT1+S-V NTSC UTV.

LCD&TV Select

This item allows you to select LCD or TV for display type. Setting options: off, LCD, TV, LCD+TV.

Display From CMOS

This item allows you to enable or disable the function of display from CMOS in Window 2000. Setting options: Disabled, Enabled.

2-17