King Kutter Part No 999993 manual Rotary Mower Operation Step

Page 21

Note: For best results in heavier cutting conditions adjust the deck so the rear of the mower is approximately 2" higher than the front. This method requires less horse- power and ground speeds of approximately 3-5mph. If finer shredding results are de- sired, adjust the deck to level or slightly lower in the rear. This method will keep foli- age under the deck longer resulting in finer pieces. The down side of this method is if it takes a lot more horsepower and very slow ground speed. This method is not rec- ommended unless a PTO speed of 540 RPM can be maintained.

ROTARY MOWER OPERATION

STEP 1

Before each use perform the maintenance described in maintenance section. (page 22)

STEP 2

Read, understand, and follow the information on safety training, preparation, starting and stopping safety, operational safety, transport safety warning sections of this man- ual (pages 11 thru 16)

STEP 3

With tractor running, lower rotary mower into working position.

STEP 4

With the tractor at idle RPM, engage PTO and slowly advance throttle to 540 PTO RPM. NOTE: Rotary mower designed to run at 540 PTO RPM only.

STEP 5

Select a low gear for the tractor and begin to mow. Tractor ground speed is to be controlled by gear selection only and not engine speed. Tractor ground speed should allow rotary mower to maintain 540 PTO RPM and thus maximum blade tip speed.

NOTE: Do not allow the tractor engine or rotary mower to bog down or stall. This causes undue wear and tear on the mower and tractor. If this continues to happen re- duce ground speed and raise cutting height of rotary mower until the 540 PTO RPM is able to be maintained.

Never attempt to clean out a plugged discharge chute until the tractor has been shut down and the mower blades have completely stopped.

STEP 6

After each use clean all debris from the top and bottom of the rotary mower. Re- place any missing or illegible safety decals. Inspect for any damaged or worn parts and replace before next use. Store rotary mower in a dry environment.

21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Flex Hitch Rotary Mower Operation and Parts Page To the Purchaser Page Contents Safety Equipment Safety Guidelines Figure H on Flex Hitch Rotary Mower Assembly Instructions StepFigure a Figure E Shipped with OIL in Gearbox Before Putting Rotary Mower Into ServiceSafety Training Prepartion Starting and Stopping SafetyOperational Safety Operational Safety Transport Safety Attaching to Tractor Attaching to Tractor Sizing PTO Shaft Step PRE-OPERATIONAL Adjustments Cutting Height AdjustmentOperating Instructions Rotary Mower Operation Step Grease points Joints MaintenanceStorage Safety Maintenance SafetySafety Sign Locations Page Page Page Model no Description SN# Page Flex Hitch Kutter Part Number Shear PIN PTO Shaft Slip Clutch PTO Shaft Slip Clutch Assembly BONDIOLI- Bypy Eurocardan SeriesLA Magdalena Page PTO Shafts Cover Removal Eurocardan Series HP Gearbox Part Name Gearbox 184000 184005 Limited Warranty

Part No 999993 specifications

The King Kutter Part No 999993 is a robust implement designed for a variety of agricultural applications. It has gained appreciation among landowners, farmers, and lawn care professionals alike for its reliability and efficiency. This part is known for its innovative features that enhance performance, durability, and ease of use.

One of the main features of the King Kutter 999993 is its heavy-duty construction. Made from high-quality materials, the implement is designed to withstand rigorous conditions and heavy workloads. This durability ensures that it can handle various terrains, whether smooth or rocky, without compromising performance. The robust design also means that it boasts a longer lifespan, providing significant value for investment over time.

Technological advancements integrated into the design of the King Kutter 999993 include precision engineering that optimizes its functionality. The implement is equipped with a user-friendly attachment system that allows for quick and easy installation on compatible tractors. This feature is particularly advantageous for farmers who need to switch between implements frequently, facilitating versatility in operations.

Another notable characteristic is the adjustable cutting height. This capability enables users to customize the depth of cutting based on their specific needs, making it suitable for various landscaping tasks, from mowing to land clearing. Whether you are preparing a field for planting or simply maintaining your lawn, the King Kutter 999993 adapts seamlessly to your requirements.

Safety features are also paramount in the design of this implement. The King Kutter 999993 incorporates shields and guards to protect users from debris, ensuring a safer working environment. Moreover, the implement's maneuverability makes it easier for operators to navigate tight spaces, reducing the risk of accidents.

In summary, the King Kutter Part No 999993 is a well-engineered agricultural implement that combines heavy-duty construction, user-friendly features, and advanced technologies. Its adaptability for different tasks, along with safety considerations, makes it a reliable choice for those involved in land management. With its solid reputation, the King Kutter 999993 continues to be a preferred option in the agricultural sector, delivering exceptional performance and efficiency in every use.
Top Page Image Contents