Jonsered CS 2186 manual Cutting equipment designed to minimise kickback, Bar, Saw chain

Page 11

SAFETY INSTRUCTIONS

1Cutting equipment designed to minimise kickback

Faulty cutting equipment or the wrong combination of bar and chain increases the risk of kickback. Use only the bar and chain combinations recommended in the ”Technical data” section.

The only way to avoid kickback is to make sure that the kick- back zone of the bar never touches anything.

By using cutting equipment with “built-in” kickback protection and keeping the chain sharp and well-maintained you can reduce the effects of kickback.

A Bar

The smaller the tip radius the smaller the kickback zone and the lower the chance of kickback.

B Saw chain

A saw chain is made up of a number of links, which are available in standard and low-kickback versions.

None

Standard Low-kickback

CUTTING LINK

DRIVE LINK

SIDE LINK

Combining these links in different ways gives different degrees of kickback reduction. In terms of kickback reduction alone, four different types of link are available.

Kickback reduction

Cutting link

Drive link

Side link

LOW

STANDARD

HIGH

EXTRA HIGH

CSome terms that describe the bar and chain

When the cutting equipment supplied with your saw becomes worn or damaged you will need to replace it. Use only the type of bar and chain recommended by us. See the ”Technical data” section to find out which equipment is recommended for your saw.

Bar

• LENGTH (inches/cm)

•NUMBER OF TEETH ON

BAR TIP SPROCKET (T). Small number = small tip radius = low-kickback

•CHAIN PITCH (inches) The spacing between the drive links of the chain must

match the spacing of the teeth on the bar tip sprocket and drive sprocket.

•NUMBER OF DRIVE LINKS The number of drive links is

determined by the length of the bar, the chain pitch and the number of teeth on the bar tip sprocket.

• BAR GROOVE WIDTH (inches/mm)

The groove in the bar must match the width of the chain drive links.

•SAW CHAIN OIL HOLE AND HOLE FOR CHAIN

TENSIONER

The bar must be matched to the chain saw design.

Saw chain

• SAW CHAIN PITCH (=PITCH) (inches)

• DRIVE LINK WIDTH (mm/ inches)

• NUMBER OF DRIVE LINKS

• LEVEL OF KICKBACK REDUCTION

The level of kickback reduction offered by a chain is indicated by its model number.

See the ”Technical data” section to find the model numbers of chains that are recommended for use with your saw.

English – 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Operator´s manual Symbols KEY to SymbolsContents Personal Protective Equipment Safety Instructions3a Starting Chain brake and front hand guardRight hand guard Throttle lockChain catcher Muffler Stop switchVibration damping system Checking the brake trigger Checking brake band wearChecking the front hand guard Checking the inertia brake releaseThrottle lock 5 basic rules Cutting EquipmentSome terms that describe the bar and chain Cutting equipment designed to minimise kickbackBar Saw chainRisk of kickback is increased with a badly sharpened chain Sharpening your chain and adjusting raker clearanceGeneral information on sharpening cutting teeth Sharpening cutting teethTensioning the chain General advice on setting raker clearanceSetting the raker clearance Never use waste oil Lubricating cutting equipmentChain oil Filling with chain oilChain drive sprocket Checking chain lubrication Needle bearing maintenanceChecking wear on cutting equipment Lubricating the bar tip sprocketWhat is kickback? HOW to Avoid KickbackNever use the saw one- handed General rulesDo not let go of the handles 10 ft Min mGeneral Working Instructions Basic safety rulesCutting Basic cutting techniqueGeneral TermsFelling direction Tree felling techniqueSafe distance LimbingFelling Clearing the trunk and preparing your retreatFreeing a Trapped tree General adviceFreeing a tree that has fallen badly = high accident risk Cutting the trunk into logsWhat is what? What is WHAT?Mounting guide bar and chain AssemblyFuelmix Fuel Handling10ft FuellingMin 3 m Stop Start and StopStart and stop StartCarburetor MaintenanceTensioning the recoil spring Starter device assemblyStarter device Changing a broken or worn starter cordMuffler Needle bearing maintenanceAdjustment of the oil pump Air filterElectrically heated carburetor CS 2186WH Centrifugal cleaning Air InjectionCooling system Heated handles CS 2186WMonthly maintenance Weekly maintenance Daily maintenanceTechnical Data + 46 36 14 65 Emission Control Warranty Statement+ 46 36 14 65 00. Warranty Period 2002W21 108 88

CS 2186 specifications

The Jonsered CS 2186 is a versatile chainsaw designed to meet the needs of both professional and recreational users. Known for its robust performance and user-friendly features, this saw showcases great engineering and innovative technology.

One of the standout features of the CS 2186 is its powerful engine. Incorporating a 50.2 cc engine, it delivers an impressive power output that allows smooth cutting through wood of varying densities. This engine is designed with modern technology to ensure efficient fuel consumption, reducing emissions without compromising performance.

The chainsaw is equipped with a 16 to 20-inch bar, providing options for different cutting applications. Whether for tree felling, limbing, or firewood preparation, the adjustable bar length makes the CS 2186 a flexible choice suited for a variety of tasks. The specific chain design promotes an excellent cutting experience, combining sharpness and durability.

Comfort and ease of use are also priorities for the Jonsered CS 2186. The chainsaw features an ergonomic handle with anti-vibration technology, which minimizes fatigue during prolonged use. Users can work longer and with more control, enhancing overall safety and precision in cutting.

Another noteworthy technology is the Easy Start system, which significantly reduces the effort needed to start the engine. This is especially beneficial for those who may struggle with traditional starting methods. Additionally, the chainsaw includes an automatic oiler that ensures proper lubrication of the chain, contributing to both efficiency and longevity of the equipment.

Safety is paramount in chainsaw design, and the CS 2186 incorporates multiple safety features. It includes a chain brake that acts immediately in case of kickback, preventing serious injuries. The front-hand guard and throttle lock further enhance safety by providing additional protection and control.

Overall, the Jonsered CS 2186 stands out for its blend of power, innovative technologies, and user-focused design. This chainsaw represents an excellent investment for anyone in need of a reliable, efficient, and safe cutting tool capable of performing a variety of jobs effectively. Whether you're a landowner, professional lumberjack, or simply enjoy working with wood, the CS 2186 is a commendable choice that exemplifies quality and performance in the world of chainsaws.
Top Page Image Contents