Jonsered GR2026L/CL, GR2032L manual Cutting equipment, Trimmer head

Page 7

SAFETY INSTRUCTIONS

6. Cutting equipment

The section describes how through correct maintenance and through using the right type of cutting equipment you can:

•Obtain maximum clearing capacity.

•Increase the service life of the cutting equipment.

Two basic rules:

1)Only use the cutting and guard equipment we recommend! See chapter “Technical data“.

2)Check the cutting equipment with regard to damage and crack formation. Damaged cutting equipment should always be replaced.

7. Locking nut

• Protect your hand from injury when assembling, use the blade guard as protection when tightening with a socket spanner. Tighten the nut by turning against the direction of rotation. Loosen the nut by turning in the direction of rotation. (NOTE! the nut has a left-hand thread).

• Tighten the nut using a socket spanner, 35 - 50 Nm (3.5 - 5 kpm).

NOTE!

The locking nut‘s nylon lock must not be so worn that it can be turned by hand. The lock shall hold at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

!WARNING!

Never use a machine with defective safety equipment. The safety equipment should be maintained as described in this section. If your machine does not meet any of these controls you should contact your service workshop.

Cutting equipment

IMPORTANT INFORMATION

The section describes how through correct maintenance and through using the right type of cutting equipment you can obtain maximum clearing capacity and increase the service life of the cutting equipment.

•Only use the cutting and guard equipment we recommend! See chapter “Technical data“.

Trimmer head

• Only use a trimmer head and trimmer cord that is recommended. These have been tested by the manufacturer to suit a particular engine size. This is especially important when a fully automatic trimmer head is used. Only use the cutting equipment we recommend! See chapter “Technical data“.

•Generally smaller machines require a small trimmer head and vice versa. This is because when clearing using a cord the engine must throw out the cord radially from the trimmer head and also meet resistance from the grass being cleared.

•The length of the cord is also important. A longer cord requires greater engine power than a shorter cord of the same diameter.

•Make sure the knife positioned on the trimmer guard is intact. This is used to cut the cord to the correct length.

•To increase the life of the cord it can be soaked in water for a few days. This will make the line tougher and it will keep longer.

IMPORTANT INFORMATION

Always ensure the trimmer cord is wound tightly and evenly around the drum, otherwise harmful vibrations will occur.

!WARNING!

Always stop the engine before starting work on any part of the cutting equipment. This continues to rotate even after the throttle has been released. Ensure that the cutting equipment has stopped completely and remove the cable from the spark plug before you start to work on it.

English – 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents EPA Operator´s manualSymbols Symbol ExplanationContents Machine‘s safety equipment Safety InstructionsPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting EquipmentMaintenance Trimmer head Cutting equipmentTransport and storage General safety instructionsFuel safety StartBasic working techniques Basic safety precautionsGrass trimming using the trimmer head and plastic knifes General working instructionsTrimming ClearingSweeping What is what on the trimmer? What is WHAT?Assembly of the trimmer head AssemblyDismantling AssemblingFuel mixture Fuel HandlingFuelling Control before starting Start and StopStart and stop Carburetor MaintenanceHigh speed needle H Correctly adjusted carburetor Final setting of the idling speed TCooling system MufflerAir filter Spark plug Two-part shaft Maintenance scheduleAngle gear Technical data GR 2026L/CL GR 2032L Technical DataYour Warranty Rights Obligations Emission Control Warranty StatementAuto Poly Trim Click Trimmy H ´*xt3¶5¨ ~ 15 cm 2002W04 108 88

GR2026L/CL, GR2032L specifications

The Jonsered GR2032L and GR2026L/CL models are high-performance garden tractors designed for both commercial and residential landscaping needs. With their durable build and advanced features, these machines are engineered to tackle a variety of tasks efficiently and effectively.

One of the standout features of the GR2032L is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it delivers strong performance with a displacement of 656cc. This model offers a cutting width of 32 inches, making it ideal for medium to large-sized lawns. The GR2026L/CL, on the other hand, is powered by a versatile Kohler engine, providing a robust 26 horsepower, which ensures stability and reliability during operation.

Both models boast a user-friendly hydrostatic transmission system, allowing for seamless speed control and effortless maneuvering. This feature enhances the operator's comfort, especially when navigating around obstacles or mowing on uneven terrain. The hydrostatic system eliminates the need for manual gear shifting, making it easier for users to focus on achieving a clean cut.

The cutting decks of the GR2032L and GR2026L/CL are constructed with high-quality materials, ensuring longevity and resistance to wear. The cutting height can be easily adjusted, offering versatility for different grass types and seasonal requirements. Both models also incorporate the innovative Quick Attach system, which allows users to switch between various attachments like baggers, plows, and snow blowers, making them multifunctional machines suitable for year-round use.

Ergonomics play a significant role in the design of these garden tractors. The comfortable seat and adjustable steering wheel cater to operators of different sizes and preferences, reducing fatigue during extended use. The dashboard is intuitively laid out, providing clear visibility of all essential information while in operation.

In summary, the Jonsered GR2032L and GR2026L/CL garden tractors combine powerful engines, user-friendly transmission systems, durable construction, and ergonomic design. They offer versatile functionality through various attachments and adjustment options, making them ideal for landscaping tasks in diverse environments. Whether you are a homeowner or a landscaping professional, these models are equipped to deliver performance and reliability.
Top Page Image Contents