Jonsered GR2026L/CL, GR2032L manual Start and Stop, Control before starting, Start and stop

Page 15

START AND STOP

Control before starting

For reasons of safety follow these recommendations!

•Check that the support flange is not cracked due to fatigue or due to being tightened too much. Discard the support flange

if it is cracked.

•Ensure the locking nut has not lost its captive force. The nut lock should have a locking force of at least 1.5 Nm. The tightening torque of the locking nut

should be 35-50 Nm.

• Check that the trimmer head and spray guard are not damaged or cracked. Replace the trimmer head or spray guard if they are exposed to impact or are cracked.

•Never use the machine without a guard or spray guard nor with a defective guard.

Cold engine

IGNITION: Set the stop switch to the start position. CHOKE: Set the choke control in the choke position.

AIR PURGE: Press the air purge diaphragm repeatedly until fuel begins to fill the diaphragm. The diaphragm need not be completely filled.

Warm engine

Use the same starting procedure as for the cold engine, but do not set the choke control in the choke position. The start throttle position is obtained by setting the choke control in the choke position and then returning it to its original position.

Stop

The engine is stopped by switching off the ignition.

!WARNING!

When the engine is started with the choke in the choke or start position the cutting equipment starts to rotate immediately.

Start and stop

!WARNING!

The complete clutch cover with shaft must be fitted before the machine is started, otherwise the clutch can become loose and cause personal injury.

Always move the machine from the filling area before starting. Place the machine on a flat surface. Ensure the cutting equipment cannot come into contact with any object. Make sure no unauthorised persons are in the working area, otherwise there is a risk of serious personal injury. The safety distance is 15 metres.

Start

Press the machine body against the ground using your left hand (NOTE! Not your foot). Grip the starter handle, slowly pull out the cord with your right hand until you feel some resistance (the starter pawls grip), now quickly and powerfully pull the cord. Reset the choke control as soon as the engine fires and repeat until the engine starts. When the engine starts quickly apply full throttle and the start throttle will automatically disengage.

NOTE! Do not pull the starter cord out completely and do not release the starter cord from the fully extended position. This can damage the machine.

English – 15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents EPA Operator´s manualSymbols Symbol ExplanationContents Safety Instructions Machine‘s safety equipmentPersonal protective equipment Locking nut Vibration damping systemMuffler Cutting EquipmentMaintenance Trimmer head Cutting equipmentTransport and storage General safety instructionsFuel safety StartBasic working techniques Basic safety precautionsGrass trimming using the trimmer head and plastic knifes General working instructionsClearing TrimmingSweeping What is what on the trimmer? What is WHAT?Assembly of the trimmer head AssemblyDismantling AssemblingFuel Handling Fuel mixtureFuelling Start and Stop Control before startingStart and stop Carburetor MaintenanceHigh speed needle H Correctly adjusted carburetor Final setting of the idling speed TMuffler Cooling systemAir filter Maintenance schedule Spark plug Two-part shaftAngle gear Technical data GR 2026L/CL GR 2032L Technical DataYour Warranty Rights Obligations Emission Control Warranty StatementAuto Poly Trim Click Trimmy H ´*xt3¶5¨ ~ 15 cm 2002W04 108 88

GR2026L/CL, GR2032L specifications

The Jonsered GR2032L and GR2026L/CL models are high-performance garden tractors designed for both commercial and residential landscaping needs. With their durable build and advanced features, these machines are engineered to tackle a variety of tasks efficiently and effectively.

One of the standout features of the GR2032L is its powerful engine. Equipped with a reliable Briggs & Stratton engine, it delivers strong performance with a displacement of 656cc. This model offers a cutting width of 32 inches, making it ideal for medium to large-sized lawns. The GR2026L/CL, on the other hand, is powered by a versatile Kohler engine, providing a robust 26 horsepower, which ensures stability and reliability during operation.

Both models boast a user-friendly hydrostatic transmission system, allowing for seamless speed control and effortless maneuvering. This feature enhances the operator's comfort, especially when navigating around obstacles or mowing on uneven terrain. The hydrostatic system eliminates the need for manual gear shifting, making it easier for users to focus on achieving a clean cut.

The cutting decks of the GR2032L and GR2026L/CL are constructed with high-quality materials, ensuring longevity and resistance to wear. The cutting height can be easily adjusted, offering versatility for different grass types and seasonal requirements. Both models also incorporate the innovative Quick Attach system, which allows users to switch between various attachments like baggers, plows, and snow blowers, making them multifunctional machines suitable for year-round use.

Ergonomics play a significant role in the design of these garden tractors. The comfortable seat and adjustable steering wheel cater to operators of different sizes and preferences, reducing fatigue during extended use. The dashboard is intuitively laid out, providing clear visibility of all essential information while in operation.

In summary, the Jonsered GR2032L and GR2026L/CL garden tractors combine powerful engines, user-friendly transmission systems, durable construction, and ergonomic design. They offer versatile functionality through various attachments and adjustment options, making them ideal for landscaping tasks in diverse environments. Whether you are a homeowner or a landscaping professional, these models are equipped to deliver performance and reliability.
Top Page Image Contents