Jonsered GC2236 manual Fuelling, Mixing

Page 16

FUEL HANDLING

Mixing

•Always mix the petrol and oil in a clean container intended for fuel.

•Always start by filling half the amount of the petrol to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of petrol.

•Mix (shake) the fuel mixture thoroughly before filling the machine’s fuel tank.

•Do not mix more than one month’s supply of fuel at a time.

•If the machine is not used for some time the fuel tank should be emptied and cleaned.

 

!

WARNING! The catalytic converter

 

muffler gets very hot during and after

 

 

 

 

use. This also applies during idling. Be

 

 

aware of the fire hazard, especially when

 

 

working near flammable substances and/

 

 

or vapours.

 

 

 

Fuelling

WARNING! Taking the following

!precautions, will lessen the risk of fire:

Do not smoke or place hot objects near fuel.

Always shut off the engine before refuelling.

Always stop the engine and let it cool for a few minutes before refuelling.

When refuelling, open the fuel cap slowly so that any excess pressure is released gently.

Tighten the fuel cap carefully after refuelling.

Always move the machine away from the refuelling area before starting.

•Always use a fuel container with an anti-spill valve.

•Clean the area around the fuel cap. Contamination in the tank can cause operating problems.

•Ensure that the fuel is well mixed by shaking the container before filling the tank.

16 – English

Page 15 Page 17
Image 16
Page 15 Page 17
Contents GC2236 Operator′s manual English KEY to Symbols SymbolsOperator of the machine must Ensure, while working, that no Persons or animals come closer thanContents Introduction Dear CustomerWhat is WHAT? What is what on the brushcutter?General Safety Precautions Personal protective equipmentMachine′s safety equipment Throttle lockoutCutting attachment guard Stop switchVibration damping system Muffler Locking nut Cutting equipmentCutting equipment Trimmer head Sharpening grass cutters and grass bladesGeneral rules Fitting the J-handle AssemblyAssembling the cutting equipment Fitting the guard extension Fitting a blade guard, grass blade and grass cutterFitting other guards and cutting attachments Fuel Handling Fuel safetyFuel Fuelling MixingStarting and Stopping Check before startingStarting and stopping StartingStopping Starter cord around your handWorking Techniques Basic safety rulesGeneral working instructions Grass clearing using a grass blade Basic working techniquesGrass trimming with a trimmer head TrimmingCutting SweepingMaintenance CarburettorFine adjustment of the idle speed T Correctly adjusted carburettorLow speed jet L High speed jet HMuffler Cooling systemBevel gear Remember the risk of fireCleaning the air filter Air filterSpark plug Oiling the air filterMaintenance schedule Maintenance Daily Weekly MonthlyTechnical Data Technical dataApproved accessories Type Cutting attachment guard, Art. no EC-declaration of conformityApplies to Europe only EN ISO 12100-2, Cispr 122005, EN ISOPoly Trim S35 2,7mm 095-.106 25 m 15 cm Tap n’ Go 35 Spin Tap n’Go 45 Spin Page Page 1151216-26

GC2236 specifications

The Jonsered GC2236 is a robust and versatile garden tractor designed for homeowners seeking efficient performance in lawn maintenance. With a focus on durability, ease of use, and advanced technology, this machine has garnered attention among gardening enthusiasts and professionals alike.

At the heart of the Jonsered GC2236 is a powerful engine featuring a reliable Briggs & Stratton design. This engine provides ample horsepower to tackle a variety of tasks, from mowing to towing, ensuring that you can maintain your lawn or garden with ease. The engine is paired with a rugged transmission that offers smooth speed variations, allowing users to adapt their pace according to the terrain and requirements of the task at hand.

One of the standout features of the GC2236 is its cutting system. It comes equipped with a 36-inch cutting deck that delivers a clean and even cut, enhancing the overall appearance of your lawn. The cutting height is easily adjustable, making it simple for users to customize their mowing experience based on grass length and conditions. The deck design allows for efficient grass collection, reducing the need for subsequent raking or clean-up.

Comfort is a key consideration in the design of the Jonsered GC2236. The tractor features a spacious, ergonomically designed seat that ensures a comfortable riding experience during extended periods of use. Additionally, the easy-to-use controls and intuitive dashboard contribute to user-friendly operation, making it accessible for gardeners of all skill levels.

Technological advancements are also integrated into this model. The GC2236 is designed with enhanced maneuverability, allowing operators to navigate tight spaces and obstacles with confidence. Its tight turning radius helps make trimming around flower beds and trees much simpler. Furthermore, the tractor's sturdy build quality and durable components ensure that it can withstand the rigors of regular use.

For those who appreciate convenience, the Jonsered GC2236 offers practical features such as a spacious cargo area for transporting tools and equipment. Its towing capacity allows users to attach trailers or other accessories, expanding its functionality beyond just mowing.

In conclusion, the Jonsered GC2236 is a standout garden tractor that combines performance, comfort, and technology to provide an exceptional gardening experience. Whether tackling large lawns or intricate landscaping, this garden tractor is a reliable choice for anyone looking to maintain their outdoor space efficiently.
Top Page Image Contents